China Original Atlas Copco 8809/8810 Manufacturer, Supplier, Factory

Working principle： Expansion and contraction driven: The constant temperature valve mainly operates based on the principle of thermal expansion and contraction. Special expansion temperature-sensitive paraffin wax and other components are usually used as the temperature sensing elements. When the oil temperature rises to the melting point of the paraffin wax, the wax expands significantly, generating a large force that pushes the push rod, causing the valve core to move and opening the valve; when the oil temperature drops, the paraffin wax contracts due to the cold, and under the spring rebound effect, the valve core resets, closing or reducing the valve opening. Oil passage control: The expansion and contraction of the valve core is used to adjust the changes in the oil passage between the valve body and the housing, thereby controlling the proportion of lubricating oil entering the oil cooler. When the oil temperature is lower than the set value, the valve closes or the opening degree decreases, and the lubricating oil directly returns from the oil-gas tank to the main unit, achieving rapid heating; when the oil temperature is higher than the set value, the valve opens, allowing the lubricating oil to enter the cooler for cooling, and the cooled lubricating oil returns to the main unit, thereby ensuring that the rotor temperature remains within the set range.

The expansion of the function of Atlas Copco air compressor mufflers In addition to their primary noise reduction function, mufflers can also help reduce the pulsation and vibration generated by the operation of the air compressor. By utilizing baffles and sound-absorbing materials, they dampen and disperse the high-pressure air pulses, making the airflow more stable and reducing turbulence. This, in turn, enhances the overall safety of the air compressor system and reduces potential risks associated with high noise and vibration.

The control unit of Atlas Copco's injection-type screw compressors is designed with intelligence, which not only simplifies operation management but also significantly improves the operating efficiency and reliability of the equipment. It is a key guarantee for achieving the "efficient, energy-saving, and safe" operation of the compressors. When choosing, it is necessary to match the corresponding specification of the control unit according to the compressor model and actual working conditions.

Atlas Copco 2906049800，The accessories in the air compressor service kit are precisely matched according to the design parameters of the equipment, effectively filtering air impurities, keeping the lubricating oil clean, separating oil from the compressed air, controlling the intake volume and pressure, and preventing faults caused by component failure. The high-quality intake valve diaphragm can prevent air leakage and avoid the continuous decrease in pressure due to inability to load after disengagement; the compatible oil-gas separator can control the oil content in the exhaust to an extremely low level, avoiding pollution of the post-treatment equipment and the gas-using equipment. The original or high-quality components in the service kit use wear-resistant and corrosion-resistant materials (such as high-precision rotors, high-quality bearings, and oil seals), which can reduce the wear of core components such as the main unit, rotor, and bearing. For example, a high-quality oil filter can filter metal particles and impurities in the lubricating oil to prevent them from entering the main unit and wearing the rotor, thereby extending the lifespan of the main unit; the compatible coolant can effectively lower the exhaust temperature, avoiding the deterioration of the lubricating oil due to high temperature and reducing the failure of the cooling system. Compared with using inferior components, in the long run, it can significantly reduce the frequency and cost of maintenance.

By using the original Atlas Copco filter kits or service kits, the failure rate of the equipment can be effectively reduced, its service life can be prolonged, and the quality of compressed air can be maintained. This is particularly suitable for industrial scenarios where high reliability of equipment is required.

Atlas Copco 3001517000,The maintenance core of Atlas Copco air filters lies in regular cleaning and replacement of the filter elements. It is recommended to remove the filter elements every week and use compressed air to blow off the dust on the surface. The normal service life of the filter element is usually around 1500 to 2000 hours. However, if the environment has a lot of dust, the replacement cycle should be shortened to 3-6 months. When the air filter indicator light on the control panel is on, it is also necessary to clean or replace it promptly. The maintenance of the water filter mainly involves regular drainage of condensate water and cleaning or replacement of the filter cup. The material of the filter cup is diverse, and during maintenance, it is necessary to follow its characteristics. Plastic filter cups should avoid being scratched with metal tools. Generally, it is recommended to clean once a month and replace once every 6 months.