The main functions of Atlas Copco XC2002
Comprehensive parameter monitoring
Real-time display of key operating parameters of the generator set, including voltage, current, frequency, power (active/reactive/apparent), speed, water temperature, oil pressure, fuel level, battery voltage, etc.
Record data such as operating time and cumulative power generation, providing a basis for maintenance and energy consumption analysis.
Operation control and mode setting
Support for various operation modes such as manual, automatic, and remote switching, suitable for different usage scenarios (such as emergency power supply, backup for base stations, etc.).
Pre-set start/stop conditions, for example, automatically switching according to grid status (start when the grid fails, stop when it recovers), achieving unmanned operation.
Fault diagnosis and protection
Built-in comprehensive fault monitoring mechanism, capable of identifying abnormal conditions such as overvoltage, undervoltage, overfrequency, underfrequency, overcurrent, overspeed, excessive water temperature, low oil pressure, insufficient fuel, etc.
When a fault is triggered, it will immediately issue audible and visual alarms, display the specific fault code, and execute shutdown or protection actions according to preset logic to prevent equipment damage.
Parameter configuration and management
Allows users to set threshold values for key parameters (such as trigger points for protection actions, alarm delay time, etc.), adapting to different load requirements and environmental conditions.
Support for multi-language display (such as Chinese, English, etc.), intuitive operation interface, facilitating use by users in different regions.
Communication and expansion capabilities
Usually equipped with standard communication interfaces (such as RS485, Modbus protocol), can be connected to remote monitoring systems, achieving centralized management and data upload.
Some models support external sensors or expansion modules to enhance monitoring range and functional flexibility.
II. Application scenarios of Atlas Copco XC2002
The XC2002 controller is mainly配套 with Atlas Copco's small and medium-sized generator sets (such as QAS series)， widely used in industrial backup power supply， construction sites， outdoor operations， etc.， enhancing the reliability and operation efficiency of the equipment through intelligent control.
