Industry News

Atlas Copco Screw Compressor Minimum Pressure Valve Assembly Original Model Selection and Notes It is necessary to select the corresponding specification of the minimum pressure valve assembly according to the compressor model (such as GA75, G110). Original factory parts (such as 1622 series, 0300 series numbers) can ensure that the pressure setting value, flow parameters, and the unit are completely matched. Non-original factory parts may cause unstable performance due to insufficient structural accuracy, and even lead to serious problems such as poor lubrication and failure of oil-gas separation. It is recommended to prioritize the use of original factory components.

If you need to purchase the water and oil pipes of Atlas Copco air compressors or confirm the specific specifications, it is recommended to provide the model of the air compressor (such as GA37, G55) and the location of the pipeline (such as the outlet pipe of the oil cooler). Refer to the serial numbers in the equipment parts manual (usually identified by a combination of numbers, such as 1622 series, 0650 series), and obtain the compatible accessories through official channels.

If you need to purchase Atlas Copco air compressor oil filter, please provide the specific model of the air compressor (such as GA18, G55) or the equipment serial number. Then, confirm the accurate model through the authorized service provider of Atlas Copco to avoid any issues due to incorrect model matching and ensure proper usage.

Selection and precautions for the oil-water separator of Atlas Copco G series air compressors The oil-water separator should be selected based on the specific model (such as G37, G75) and displacement of the G series air compressor to ensure that the processing capacity matches. It is recommended to use the original Atlas Copco oil-water separator and filter element. Their materials (such as the filter element using high-efficiency fiberglass or polyester materials) and structural design are fully compatible with the G series models, which can ensure separation efficiency and service life, and avoid secondary pollution or excessive pressure loss caused by compatibility issues.

For the high-pressure rotor balance diaphragms of Atlas Copco air compressors, if you need to purchase or confirm the specific model, it is recommended to provide the complete model of the compressor (such as ZT75, ZH110) and the rotor component number. Then, through the official after-sales service channel, query the compatible balance diaphragm model to ensure the stability and safety of the equipment operation.

Atlas Copco Air Compressor Intake Valve Maintenance Kit Compatibility and Selection The intake valve structures of different series of air compressors (such as GA37, GA75, ZT55, etc.) are different. The maintenance kit needs to be strictly matched with the model of the air compressor. Usually, the model of the air compressor or the part number of the intake valve is used as the selection basis (such as the 1622 series intake valve maintenance kit for the GA series). It is recommended to select the corresponding kit based on the specific model of the air compressor, the production year, and the model of the intake valve (you can query it in the equipment manual or on the valve body label). Avoid mismatch in size or components.