China Original Atlas Copco parts Manufacturer, Supplier, Factory

If you need to purchase the water and oil pipes of Atlas Copco air compressors or confirm the specific specifications, it is recommended to provide the model of the air compressor (such as GA37, G55) and the location of the pipeline (such as the outlet pipe of the oil cooler). Refer to the serial numbers in the equipment parts manual (usually identified by a combination of numbers, such as 1622 series, 0650 series), and obtain the compatible accessories through official channels.

The air compressor is an efficient and safe system, and its core components include:

Replacement and Maintenance Recommendations: Replacement Cycle: Generally, replace the filter every 1,000 - 2,000 hours or 6 months (whichever comes first). In environments with high dust concentration (such as mines, cement plants), this period should be shortened to 500 - 800 hours. Replacement Indicators: If the intake resistance becomes excessively high (over 100 - 150 mbar, which can be observed through a pressure gauge), if the compressor's exhaust volume decreases, or if there is abnormal noise from the main unit, it is necessary to immediately check and replace it. Maintenance Tips: During daily maintenance, the filter element can be removed. Use compressed air to blow off the surface dust from the inside out (pressure ≤ 5 bar), but do not wash it with water; during replacement, clean the interior of the filter housing to ensure there are no residual impurities.

Atlas Copco's breathing air purifier is compact and portable: Through the ingenious positioning of components, it is small in size and can adapt to various spaces or environments. It is pre-assembled and has low installation time and cost.

When choosing Atlas Copco air compressor mufflers, it is necessary to make a comprehensive match based on the signals of the air compressor, power, exhaust pressure, noise frequency characteristics, and the usage environment (such as whether there is oil contamination, high temperature, etc.), in order to achieve the desired noise reduction effect and ensure the normal operation of the compressed air system.

Common Faults and Solutions of Atlas Copco Air Compressor Pressure Gauges Pointer not moving or stuck Reason: Internal gears stuck, spring tube damaged, interface blocked (impurities or condensate water frozen). Solution: Disassemble and clean, remove the blockage; replace the gauge if severely damaged. Incorrect or drifting reading Reason: Elastic element fatigue (long-term use), pointer loose, drastic changes in environmental temperature. Solution: Re-calibrate; replace aging components or pressure gauge. Shell leakage Reason: Sealing of shock-resistant gauge is poor, screws of the shell are loose. Solution: Add silicone oil / glycerin and seal; tighten the screws; replace the shell if severely damaged.