China Oil Filter Manufacturer, Supplier, Factory

1837006168 MAINTENANCE KIT by Atlas Copco China Top Supplier.If you are looking for Genuine Original 1837006168 Maintenance Kit By China Local Distributor for your air compressors, you get to the right website. Herewith taike, we will provide you the genuine parts for this Service kit at the best price.
Accessory brand: Atlas Copco
Product name: Maintenance Kit
Part Numbers: “1837006168” “1837-0061-68” “1837 0061 68”
Package: Neutral Packing or wooden case packing
Feature: High Efficiency
Price: negotiable
Pictures only for reference. The products are according to the final order.

Atlas Copco Maintenance Tips: Regular Inspection: Remove the cylinder cover and clean the valve surface of oil stains and carbon deposits (especially for piston-type air compressors, as high-temperature lubricating oil can easily cause carbon deposits); Replace Wear Parts: Valve plates, springs, sealing gaskets, etc. are considered wear parts. When wear, deformation or aging is detected, they should be replaced in time; Keep Clean: Avoid introducing impurities during installation. The filter device of the intake system needs regular maintenance to reduce dust entering the cylinder. Although the cylinder cover valve is a small component, it directly affects the compression efficiency and operational stability of the entire machine. During daily maintenance, special attention should be paid to its sealing performance and operational flexibility. If any abnormalities occur, timely repairs should be carried out to extend the service life of the air compressor.

Working Principle Torque Transmission: The torque output by the motor is transmitted through the outer teeth of the coupling, and then via the inner teeth of the intermediate sleeve to the compressor shaft, achieving power transmission. Flexible Compensation: Axial Offset: The axial clearance between the inner and outer teeth allows for a small amount of axial displacement of the two shafts (typically ±0.5 to ±3mm). Radial Offset: The top of the outer teeth is made into a spherical shape (with the center of the sphere on the axis), allowing for a certain angular deviation between the two shafts (typically ≤1°). Angular Offset: Through the sliding and rolling of the tooth surfaces, the angular errors between the two shafts are compensated. Buffering and Vibration Reduction: The lubricating oil fills between the teeth and can absorb some vibration and impact loads, reducing equipment noise.

all products are sourced directly from authorized retailers in the Belgium, Germany, China. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

The air compressor pressure sensor is for installation and maintenance. Installation location: It is usually installed at the outlet of the storage tank, the exhaust port of the compressor, or on the main pipeline to ensure that the sensor can accurately reflect the system pressure and avoid direct exposure to high temperatures, oil stains, or severe vibrations. Regular calibration: To ensure measurement accuracy, the sensor should be calibrated regularly (generally once or twice a year) to prevent control failure due to drift. Daily inspection: Check if the sensor wiring is loose and the seal is good to avoid affecting measurement accuracy due to air leakage or poor contact; if any abnormal display or no signal output is found for the sensor, it is necessary to promptly troubleshoot the fault or replace it.

The maintenance significance of the check valve stem adjustment kit for Atlas Copco ZT55-90 series air compressors Precise valve stem adjustment can ensure that the intake valve fully opens when loaded and fully closes when unloaded, directly affecting the volumetric efficiency and energy consumption of the compressor. Regular inspections can help detect valve stem wear or jamming issues in advance, avoiding unit shutdown or overload damage to core components due to failure of the intake valve. When choosing, it is recommended to prioritize the use of Atlas Copco original kit to ensure that the component size, material, and model fully match the ZT55-90 series, guaranteeing the adjustment effect and equipment operation reliability.