China Atlas Copco Screw Air Compressor Oil Filter Element Manufacturer, Supplier, Factory

Replacement and Maintenance Precautions: If cracks, deformations, damage to the sealing parts, or worn-out connection threads occur on the shell, it must be replaced immediately. Otherwise, unfiltered air will directly enter the main unit, causing wear and tear on components such as rotors and bearings. During daily maintenance, it is necessary to check whether the seal between the shell and the filter element is intact, and clean the dust and impurities inside the shell (especially when replacing the filter element). When installing a new shell, ensure that the sealing ring is installed properly, and tighten the connecting bolts according to the specified torque to avoid air leakage or damage to the shell due to vibration.

Maintenance and precautions for the control unit of Atlas Copco air compressors Regularly check the display screen and buttons of the control unit to ensure they are functioning properly and that the heat dissipation and ventilation are adequate, to prevent the impact of high temperatures on performance. If a fault code appears, it is recommended to refer to the equipment manual for interpretation or contact the authorized service center of Atlas Copco for handling to avoid the expansion of problems due to self-operation. Some control units support firmware upgrades, and updates can be obtained through official channels to enhance functional stability.

Original Equipment Parts and Replacement Considerations The Atlas Copco gear set is a core component. It is recommended to preferentially use original equipment parts . The advantages of using original equipment parts are as follows: It perfectly matches the parameters of the main unit and the motor, ensuring transmission efficiency The material and processing accuracy meet strict standards, and the lifespan can reach 8-150,000 hours If alternative parts are chosen, the gear module, tooth count, tooth profile , center distance, etc. must be strictly verified to avoid operational failures due to size deviations. In summary, the Atlas Copco air compressor gear set, with its high-precision design and high-quality materials, ensures efficient transmission of the equipment. However, it is necessary to conduct regular maintenance to extend its service life and avoid the entire machine stopping due to gear failures.

Our genuine Compressor Oil Filters are made from corrosion-resistant materials that lengthen your compressor oil lifetime. Its bypass valve guarantees a continuous oil flow to the compressor element, even in cold-start conditions or in the event of a clogged filter! High-quality synthetic filter paper: temperature and compressor oil-resistant, high-performance, and finely textured. High dirt-holding capacity to extend service intervals while protecting the compressor element. Uniform paper pleat spacing and increased mechanical resistance to pressure fluctuations, resulting in a safer working environment

Usage and Maintenance Notes Strictly match the model Different series of air compressors (such as GA, GHS, ZR, etc.) require the use of corresponding model-specific oils. Mixing or using the wrong type may cause equipment damage and affect warranty. Regular replacement and inspection Replace according to the specified cycle in the equipment manual (synthetic oil usually has a longer cycle than mineral oil), and replace oil filters, air filters, etc. at the same time. Regularly test the oil quality (such as viscosity, moisture content, impurity content) to avoid failures caused by deteriorated oil. Storage and refilling The oil needs to be stored in a sealed manner in a cool and dry place to avoid contamination; when refilling, ensure that the tools are clean to prevent impurities from entering the oil circuit system.

The impact of filter oil system failure in Atlas Copco air compressors If the filter elements fail or are not maintained properly, it may lead to: Excessive oil content in compressed air, contaminating downstream equipment or products (especially having a significant impact on industries such as food and medicine). Increased impurities in lubricating oil, accelerating wear of components such as rotors and bearings, and shortening the equipment's lifespan. Excessive differential pressure in the oil-gas separator, increasing energy consumption and even causing the system to overload and shut down.