China Atlas Copco Original Air compressor Oil Filter Manufacturer, Supplier, Factory

The HP ELEMENT EXCHANGE KIT of Atlas Copco air compressors have extremely high requirements in terms of material, insulation performance, and temperature resistance, and must comply with relevant high-pressure electrical standards. During use, the following points should be noted: Regularly conduct insulation tests and functional verifications to prevent performance degradation due to aging or moisture absorption. When replacing components, select original factory or certified compatible parts to ensure compatibility with the equipment's high-pressure system and avoid potential safety hazards caused by substandard components. The maintenance operations must be carried out by professionals with high-voltage electrical qualifications and strictly follow safety procedures.

Atlas Copco 1901902344,The function of the Atlas Copco air compressor vent valve: To safely release pressure. When the equipment is shut down or stopped, it automatically discharges the internal gas to prevent pressure accumulation and the risk of explosion or equipment damage. Some models can monitor pressure in real time and automatically adjust the venting volume to avoid surge phenomena. System pressure reduction: By controlling the gas discharge, it ensures the stability of the pressure in the equipment and pipeline system, especially suitable for high-pressure environments. Auxiliary startup: After shutdown, it automatically releases pressure to help the oil and gas tank quickly reduce the base pressure, facilitating the next startup.

2906066100 Atlas Copco's metal oil pump component service kit replacement and maintenance recommendations for the ZR/ZL 55-90 series screw air compressors When there are abnormal oil pump noises, fluctuating supply pressure, insufficient lubricating oil flow, or oil leakage in the oil circuit, it is recommended to check the oil pump status and use this service kit for maintenance. During the replacement process, strictly follow the procedures in the equipment manual to operate and ensure the correct installation of the components, and conduct a pressure test after the repair to confirm that the performance of the oil pump has returned to normal.

Atlas Copco Air compressor Roller Bearing The rolling bearings of the air compressor are the key components that support rotating parts (such as crankshafts, rotors, motor shafts, etc.). Their main function is to reduce the frictional resistance during rotation, and they also bear radial and axial loads to ensure the efficient and stable operation of the equipment.

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc. Preventing oil passage blockage: Prevent impurities from accumulating in the oil passage, ensure the smoothness of the oil passage, enable the lubricating oil to circulate normally, provide sufficient lubrication and cooling for each component, and prevent problems such as overheating shutdown caused by insufficient oil supply.