+86-15802015368
atlascopco128@163.com
English
Dongguan Taike Trading Co., Ltd.
Dongguan Taike Trading Co., Ltd.
Products

Products

China OIL FILTER ELEMENT parts Manufacturer, Supplier, Factory

Our advancement depends over the superior machines, exceptional talents and continually strengthened technology forces for OIL FILTER ELEMENT parts, air compressor OIL FILTER ELEMENT, Atlas Copco OIL FILTER ELEMENT, Atlas Copco parts, We welcome new and aged shoppers from all walks of daily life to call us for long term business associations and mutual accomplishment!
OIL FILTER ELEMENT parts, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.

Related Products

Hot Products

  • Genuine Original 1621510700 Air Filter Element

    Genuine Original 1621510700 Air Filter Element

    When you are looking for 100% Genuine Original ATLAS COPCO air filter 1630040899 or any other parts, feel free to contact one the largest distribution network based in China.As the professional manufacturer, we would like to provide you Genuine Original 1621510700 Air Filter Element.
  • 2906095800 Atlas Copco Air Compressor Unloader Kit

    2906095800 Atlas Copco Air Compressor Unloader Kit

    Maintenance precautions for the load reduction device kit of Atlas Copco air compressors: Regularly clean the internal components of the load reducer to prevent the accumulation of oil and impurities, which could cause valve sticking or malfunction. Check the integrity of the seals and replace aging parts in time to avoid pressure control accuracy being affected by leakage. During commissioning, calibrate the pressure setting value according to the equipment manual to ensure accurate loading/unloading switching and avoid frequent start-stop or excessive pressure fluctuations.
  • 2906013000 Atlas Copco

    2906013000 Atlas Copco

    2906013000 Atlas Copco's original oil cooler replacement and maintenance suggestions for the ZA ZR5-6 screw air compressor When abnormal oil temperature rise, cooling effect decline or cooler leakage occur, it is necessary to check and replace the oil cooler in time. It is recommended to use original components to ensure compatibility and performance. During the replacement process, please follow the equipment maintenance manual's specifications to ensure good installation sealing, avoiding oil leakage or air entering the system.
  • Atlas Copco 2906012900

    Atlas Copco 2906012900

    Atlas Copco 2906012900，By conducting heat exchange, the heat generated inside the air compressor is transferred to the cooling medium (such as water or air), effectively reducing the temperature of the lubricating oil. High temperatures can cause problems such as the softening of the lubricating oil and the deformation of bearings. The oil cooler continuously cools down to prevent key components like bearings from being damaged due to overheating, ensuring the normal operation of the air compressor. An appropriate oil temperature helps improve the overall efficiency of the air compressor. Overheating leads to a decline in performance, while the oil cooler ensures that the lubricating oil circulates at the optimal temperature, maintaining the stable output of the compressor. By reducing wear and failures caused by high temperatures, the oil cooler significantly extends the lifespan of the air compressor.
  • 1089962512 atlas copco sensor press parts

    1089962512 atlas copco sensor press parts

    Pressure sensor Working principle: It achieves pressure monitoring by measuring the pressure difference and converting it into an electrical signal. Main functions: It can monitor the inlet and outlet pressures of the air compressor as well as the pressure of the storage tank in real time, thereby preventing the system from operating under overpressure conditions and effectively ensuring system safety. Application scenarios: It is widely used in pressure control, discharge regulation, and safety protection, etc. Common types: Including strain type, piezoresistive type, etc.
  • 2901195700 Atlas Copco

    2901195700 Atlas Copco

    Replacement and Maintenance Key Points 2901195700 Atlas Copco Replacement Cycle: 4000 - 6000 hours or replace as needed annually; for high dust / high humidity or heavy load conditions, it can be shortened to 3500 - 4000 hours. Installation and Sealing: Install according to the manual torque, replace all O-rings, avoid unfiltered air or oil bypass. Pressure Difference Monitoring: Pay attention to the oil pressure difference and fuel consumption, if it abnormally increases, stop the machine for inspection and replacement. 2901195700 Atlas Copco Companion Replacement: It is recommended to replace simultaneously with air filter, oil filter, and lubricating oil to reduce the oil pressure difference and energy consumption.

  • 0830100812 Atlas Copco Compressor Safety Valve

    I. Working Principle The safety valve is designed based on the principle of force balance. It mainly consists of a valve seat, a valve core, a spring, and a regulating mechanism. When the system pressure exceeds the spring's preload force, the valve core is pushed up, and the medium (compressed air) is discharged; when the pressure drops to the return seat pressure, the spring pushes the valve core back to its original position, closing the valve. Key parameters: Opening pressure (set pressure): The pressure at which the valve begins to open, usually 1.05 to 1.1 times the working pressure. Emission pressure: The pressure when the valve reaches its maximum opening height, generally ≤ 1.1 times the opening pressure. Return seat pressure: The pressure when the valve is closed, usually 10% to 15% lower than the opening pressure. Sealing pressure: The maximum pressure at which the valve maintains sealing, generally 90% of the opening pressure.

  • 2901164300 Atlas Copco oil separator

    Never forget to order a spare part and avoid unplanned downtime. As your original equipment manufacturer, we know exactly which parts are needed for every service intervention. These are offered as a single maintenance kit with the quality assurance of genuine Atlas Copco parts.

  • 2906041800 Drive Shaft Seal Kit for Atlas Copco Air Compressor

    Maintenance cycle and failure manifestations of the transmission shaft seal kit for Atlas Copco air compressors: It is recommended to inspect once every 8,000 - 12,000 operating hours, or replace it immediately if there is oil leakage on the outside of the machine body. Failure symptoms: Oil leakage (oil type), abnormal loss of compressed air, abnormal noise from bearings (caused by impurities intrusion) If you need specific part information, please provide the complete model of the air compressor (such as GA22 VSD) and the production year, so that we can accurately query the specifications and replacement manual of the original Atlas Copco seal kit.

  • Atlas Copco Kit service 8000H ZH350-900 2230014202

    Choosing the Atlas Copco 8000 hour service package is an important measure to ensure the long-term and efficient operation of the compressor. It is particularly suitable for industries that require continuous production (such as manufacturing and energy industries), and through regular maintenance, it can minimize the overall maintenance cost of the equipment.

  • 1613610590 Atlas Copco air compressor FILTER OIL Original

    Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

  • 2901990772 COOLER KIT ZH 355-1600

    2901990772 COOLER KIT ZH 355-1600 Working Principle: Taking the oil cooler as an example, its working principle is that water flows through the tube side, and the oil flows between the tubes. The intermediate baffle plate causes the oil to redirect, and a two-pass or four-pass flow mode is adopted to enhance the cooling effect, thereby transferring the heat of the lubricating oil to the cooling water to achieve the cooling of the lubricating oil.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept