China Air Filter Manufacturer, Supplier, Factory

Maintenance precautions for the oil filter and air filter components of Atlas Copco air compressors: When replacing, clean the interior of the filter housing to avoid secondary contamination by residual impurities. When installing, ensure a proper seal to prevent air leakage (for the air filter) or oil leakage (for the oil filter). It is recommended to inspect both the air filter and the oil filter simultaneously. If one of them is severely clogged, it may indicate an abnormality in the environment or the system (for example, clogged air filter may lead to insufficient air intake, indirectly exacerbating oil contamination).

Faults and Replacement Suggestions: Common Faults and Handling: Winding Burnout: Usually caused by abnormal voltage or long-term overloading, manifested as the electromagnetic valve not moving. It is recommended to replace the entire electromagnetic valve (including the winding); Valve Core Stuck: Caused by impurities or oil contamination, preventing the valve from fully opening or closing, which may lead to abnormal pressure or poor drainage. It is necessary to replace the original part; Leakage: Caused by aging of the sealing components, it is necessary to replace in time to avoid loss of compressed air or engine oil. When replacing, please note: Power off operation, confirm that the voltage specification is consistent, and when installing, the sealing component should be coated with a small amount of engine oil to enhance the sealing performance.

Basic working principle A three-phase induction motor generates a rotating magnetic field by connecting to three-phase alternating current and passing it through the stator windings. The rotor cuts the magnetic lines of force in the magnetic field, generating an induced current, which is then subjected to electromagnetic force and rotates in accordance with the magnetic field (the rotational speed is slightly lower than that of the rotating magnetic field, and there is a slip rate). The electrical energy is converted into mechanical energy to drive the compression mechanism of the air compressor (such as pistons, screws, etc.) to operate. Adaptation features

Original factory parts and selection The model of Atlas Copco fan blades must be strictly matched with the air compressor model (such as GA series, GHS series, etc.). Different models have different dimensions, hole diameters, and blade quantities. Original factory parts can be purchased through our authorized channels to ensure compatibility with the equipment and avoid operational failures caused by size mismatches.

Choosing the Atlas Copco 8000 hour service package is an important measure to ensure the long-term and efficient operation of the compressor. It is particularly suitable for industries that require continuous production (such as manufacturing and energy industries), and through regular maintenance, it can minimize the overall maintenance cost of the equipment.

Replacement and Maintenance: Gaskets are wear-prone parts. They should be checked and replaced promptly during regular maintenance of the air compressor or when leakage occurs. During the replacement process, ensure the installation surface is clean to avoid poor sealing due to impurities. Also, follow the specifications in the equipment manual for proper operation to ensure a proper installation.