China Air Filter Element Service Kit QDT35+ Manufacturer, Supplier, Factory

Atlas Copco 2906007100,The air compressor maintenance package protects the design of the air compressor, reduces equipment wear, maintains stability and extends lifespan: The maintenance includes air filters, oil filters, and oil-gas separators, etc. Regularly remove impurities to prevent blockages and ensure proper temperature operation. 2230000800,Original factory parts maintenance can avoid performance degradation and equipment damage of original factory parts, reduce the risk of thermal shutdown, and extend the overall lifespan. The entire maintenance package has a lower price and can be purchased in bulk. It optimizes inventory management and reduces costs caused by downtime

Atlas Copco 2906013000,By conducting heat exchange, the heat generated inside the air compressor is transferred to the cooling medium (such as water or air), effectively reducing the temperature of the lubricating oil. High temperatures can cause problems such as the softening of the lubricating oil and the deformation of bearings. The oil cooler continuously cools down to prevent key components like bearings from being damaged due to overheating, ensuring the normal operation of the air compressor. An appropriate oil temperature helps improve the overall efficiency of the air compressor. Overheating leads to a decline in performance, while the oil cooler ensures that the lubricating oil circulates at the optimal temperature, maintaining the stable output of the compressor. By reducing wear and failures caused by high temperatures, the oil cooler significantly extends the lifespan of the air compressor.

Atlas Copco WUX Regulator Valve Maintenance and Precautions Regular Inspection: Observe whether the valve operates smoothly and check for any sticking (possibly caused by oil contamination or impurities); Check the sealing performance. If there is air leakage (such as air flowing through when the valve is closed), replace the sealing element. Cleaning and Calibration: Regularly disassemble and clean the valve core, valve seat, and diaphragm, removing oil stains and carbon deposits; Calibrate the pressure setting value according to the equipment manual to ensure adjustment accuracy (avoid excessive pressure fluctuations). Replacement Suggestions: If the valve cannot be adjusted, has severe air leakage, or suffers mechanical damage, it should be replaced promptly (it is recommended to use original factory parts to ensure compatibility with the compressor control system).

Attention to the Atlas Copco Adsorption Dryer Silencer: During installation, ensure that the sealing gasket is intact to prevent air leakage, which could lead to increased noise and reduced regeneration efficiency; Do not replace it with an incompatible model at will (for example, if the diameter is too small, it will cause excessive exhaust resistance, affecting the regeneration effect of the adsorbent); The original factory silencer is usually designed with acoustic optimization, not only providing better noise reduction effects, but also ensuring the smoothness of the regeneration exhaust and maintaining the normal cycle of the dryer.

The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

The "8000-hour service maintenance kit" of Atlas Copco typically includes spare parts (varies by model) For fuel injection type: air filter, oil filter, oil-gas separator, special lubricating oil, O-rings and seals, etc. For oil-free type: air filter, "oil filter" (coolant / liquid filter), condensate valve / condensation treatment related parts, belts / coupling seals, etc.