China Compressors Air Filter Manufacturer, Supplier, Factory

Atlas Copco's breathing air purifier is compact and portable: Through the ingenious positioning of components, it is small in size and can adapt to various spaces or environments. It is pre-assembled and has low installation time and cost.

Maintenance and servicing tips for the tubular coolers of Atlas Copco compressors: Regular cleaning: Depending on the operating environment, clean the inside and outside of the cooling tubes of the tubes and the sealing surfaces of the caps (using chemical cleaning or mechanical flushing) to prevent a decline in heat exchange efficiency. Leak detection: Check for any leaks at the pipe connections and sealing surfaces of the caps. Replace the seals or repair damaged pipes in a timely manner. Flow monitoring: Ensure that the flow and pressure of the cooling medium (water or air) are within the specified range. If insufficient, investigate pipe blockages or pump/fan failures. Anti-freezing protection： In low-temperature environments， after shutdown， drain the accumulated water in the cooling water pipes to prevent cracking due to freezing.

Notes on Replacement and Selection Original Factory Parts Preferred: Atlas Copco's gaskets have strict size and material standards. When replacing, it is recommended to use original factory parts to ensure a perfect fit with the connection area. Material Matching: Select gaskets of the corresponding material based on the medium, temperature, and pressure at the installation location. Avoid rapid failure due to improper material selection. Installation Specifications: Clean the connection surface, remove oil stains, rust, and residues of the old gasket. Ensure the gasket is placed correctly , and if necessary, apply a small amount of sealant on the gasket surface . Tighten the bolts evenly according to the specified torque to avoid over-tightening and damaging the gasket or under-tightening and resulting in poor sealing.

Atlas Copco Air Compressor Oil Check Valve Maintenance and Replacement Check Period: It is recommended to conduct checks every 1-2 years or in accordance with the equipment manual (for example, after 4000-8000 hours of operation), and perform the checks simultaneously when replacing the filter and oil. Maintenance Points: Clean the valve core and valve seat to remove impurities; Check the wear of the seals and replace them promptly if they are aged; Test the elasticity of the springs. If the elasticity is insufficient, replace the entire valve. Replacement Precautions: Select original factory parts that match the model (such as Atlas Copco, Ingersoll Rand, etc. have dedicated oil check valves). Ensure that the size and pressure parameters are consistent; Pay attention to the direction during installation, and avoid installing it in the wrong direction; After replacement, start the equipment and check if the oil circuit pressure is normal and if there is any leakage.

Although the seals of Atlas Copco are considered wear-prone parts, they are crucial for the efficient and safe operation of the air compressor. Proper selection, regular replacement, and standardized installation can effectively reduce leakage faults, lower energy consumption and maintenance costs.

Atlas Copco Stationary Compressors enjoy a high reputation in the industrial field. The reason why they are highly praised worldwide is mainly due to their long-term accumulation and outstanding advantages in technological innovation, reliability, energy efficiency performance and customer service.