China Air Filter 1830020769 Manufacturer, Supplier, Factory

Atlas Copco Ventilation Pipe Component Application and Maintenance Recommendations Application Scenario: Primarily used for the ventilation system setup in air compressor rooms, especially in enclosed or poorly ventilated environments, where the use of ventilation pipe components is necessary to optimize air circulation and maintain the room temperature within the equipment's allowable range (generally recommended not to exceed 40℃). Maintenance Points: Regularly inspect the ventilation pipes for any damage, deformation, or loose connections to ensure there is no air leakage; Clean the dust accumulation in the pipes to prevent blockages that affect air volume; For flexible connection pipes, check for aging, cracking, and replace them in a timely manner to ensure their elasticity and sealing performance.

Characteristics and Requirements of Air Compressor Hose Pressure Resistance: It must be able to withstand the rated pressure output by the air compressor (usually ranging from 0.7 to 1.6 MPa, and may be higher in special scenarios), with a certain safety margin to prevent burst due to excessive pressure. Aging and Weather Resistance: It needs to resist the effects of air, humidity, temperature changes, and ultraviolet rays, avoiding cracking, hardening or softening, and extending service life. Flexibility: It should have good bending performance, facilitating flexible arrangement in the working environment and reducing operational restrictions. Anti-wear and Anti-shock: In industrial environments, it may come into contact with the ground, equipment, etc., and needs to have certain wear resistance and anti-shock capabilities to prevent accidental damage. Smoothness of Inner Wall: The smooth inner wall can reduce the resistance of compressed air flow, lower pressure loss, and ensure supply efficiency.

The original Atlas Copco air filter maintenance kit has been rigorously tested in terms of filtration efficiency, dust holding capacity, and structural strength, and is perfectly matched with the equipment design. It can maximize the filtration effect. Non-original filter elements may have issues such as insufficient filtration accuracy, excessive intake resistance, or poor sealing. Long-term use may lead to accelerated wear of the main unit, increased energy consumption, and ultimately increase the maintenance cost of the equipment.

When performing maintenance and replacement, it is recommended to refer to the official maintenance manual of the air compressor to confirm the specifications and parameters of the O-ring. Obtain the original accessories through our official channels to ensure the sealing effect and the operational reliability of the equipment, and avoid problems such as leakage and equipment failure caused by incompatible parts.

1837006168 MAINTENANCE KIT by Atlas Copco China Top Supplier.If you are looking for Genuine Original 1837006168 Maintenance Kit By China Local Distributor for your air compressors, you get to the right website. Herewith taike, we will provide you the genuine parts for this Service kit at the best price.
Accessory brand: Atlas Copco
Product name: Maintenance Kit
Part Numbers: “1837006168” “1837-0061-68” “1837 0061 68”
Package: Neutral Packing or wooden case packing
Feature: High Efficiency
Price: negotiable
Pictures only for reference. The products are according to the final order.

This Chicago Pneumatic air filter element should be changed every 4,000 hours or a minimum of once per year. This filter should be changed on a more frequent basis If your compressor is located in a dirty environment with lots of dust. Changing the air filter will prolong the life of your compressor by protecting the critical parts on the inside of the compressor. Proactively changing the air filter will also increase your energy efficiency by not restricting the inlet airflow going into the air compressor.