China AIR FILTER ELEMENT Manufacturer, Supplier, Factory

The following is the introduction of high quality Atlas Copco 40HP Rotary Screw Air Compressor, hoping to help you better understand it. Welcome new and old customers to continue to cooperate with us to create a better future!

Atlas Copco Air Compressor Oil Check Valve Maintenance and Replacement Check Period: It is recommended to conduct checks every 1-2 years or in accordance with the equipment manual (for example, after 4000-8000 hours of operation), and perform the checks simultaneously when replacing the filter and oil. Maintenance Points: Clean the valve core and valve seat to remove impurities; Check the wear of the seals and replace them promptly if they are aged; Test the elasticity of the springs. If the elasticity is insufficient, replace the entire valve. Replacement Precautions: Select original factory parts that match the model (such as Atlas Copco, Ingersoll Rand, etc. have dedicated oil check valves). Ensure that the size and pressure parameters are consistent; Pay attention to the direction during installation, and avoid installing it in the wrong direction; After replacement, start the equipment and check if the oil circuit pressure is normal and if there is any leakage.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

If you are searching for 1622507380 AIR FILTER – Atlas Copco China Supplier, You are Come to the right place. Taike provide you Genuine Original Atlas Copco Air Filter and Other’s Parts. GA30, GA37, GA45+basically use this air filter. The air filter assembly is 1622507380=1622507300, and the internal filter element is 1613740800=1613740700. Check the blow is specific data for you to cross-check.
Product name: Air Filter
Part Number:1622507380; 1622 5073 80; 1622-5073-80
Brand: Atlas Copco
Quality Level: Genuine Original
Atlas Copco Leading Delivery Time: 3-7 working days (if there is stock)
Price: Negotiable, and discounted prices are upon instant inquiry.
The picture Are Only for Reference.

Maintenance and Repair Recommendations for Metal Piston Valve Atlas Copco 1622366300 Replacement Strategy: Triggered by running hours / pressure difference / abnormal temperature or abnormal listening, replace according to the manual; for the same level of gas valves, it is recommended to replace them as a set to avoid performance imbalance. Installation and Sealing: Thoroughly clean the valve groove and passage, replace all seals, and evenly tighten; conduct airtightness test after installation, and strictly prohibit bypassing unfiltered air. Condition Monitoring: Regularly record the valve cover temperature, pressure, and vibration; abnormal temperature rise / abnormal noise indicates valve plate / spring fatigue or seal failure, and should immediately stop the machine for inspection. Atlas Copco 1622366300 Commissioning and Running-in: New machines or after major repairs, running-in and re-inspection are required to confirm no leakage and abnormal vibration.