China Air Compressor Oil Manufacturer, Supplier, Factory

Common Issues and Maintenance of Atlas Copco Air Compressor Pressure Sensors Common issues with pressure sensors include measurement drift , signal interruptio, interface leakage, etc. Maintenance suggestions: Regularly check the sealing of the sensor installation to avoid pressure leakage or measurement errors due to looseness; Keep the sensor interface clean to prevent oil contamination and impurities from blocking and affecting the measurement; When there is abnormal pressure display, frequent start-stop of the unit, or incorrect pressure protection operation, it is necessary to check if the sensor is faulty. It is recommended to replace the original sensor to ensure performance matching. When replacing, pay attention to keeping the calibration parameters consistent with the original model.

The air compressor pressure sensor is for installation and maintenance. Installation location: It is usually installed at the outlet of the storage tank, the exhaust port of the compressor, or on the main pipeline to ensure that the sensor can accurately reflect the system pressure and avoid direct exposure to high temperatures, oil stains, or severe vibrations. Regular calibration: To ensure measurement accuracy, the sensor should be calibrated regularly (generally once or twice a year) to prevent control failure due to drift. Daily inspection: Check if the sensor wiring is loose and the seal is good to avoid affecting measurement accuracy due to air leakage or poor contact; if any abnormal display or no signal output is found for the sensor, it is necessary to promptly troubleshoot the fault or replace it.

Atlas Copco 1630027906,Filtering and Purification Function: The air filter removes impurities from the air entering the air compressor to ensure the quality of the compressed air. The oil filter removes impurity particles from the lubricating oil to keep it clean and prevent metal particles, dust, etc. from entering the main unit. The oil-gas separator separates the lubricating oil from the compressed air to ensure the recycling of the lubricating oil and reduce the oil content in the compressed air. Lubrication Protection Function: The lubricating oil lubricates the internal parts of the air compressor, reducing friction and wear between parts and having good cooling performance. It forms a protective film on the surface of high-speed rotating components, preventing moisture and impurities from invading and protecting the internal parts from corrosion. System Protection Function: Prevent equipment damage by regularly replacing consumables to avoid overload and damage of the equipment due to clogged filter elements. Extend Service Life: By effective filtering and lubrication, significantly extend the service life of the air compressor main unit.

Working Principle Torque Transmission: The torque output by the motor is transmitted through the outer teeth of the coupling, and then via the inner teeth of the intermediate sleeve to the compressor shaft, achieving power transmission. Flexible Compensation: Axial Offset: The axial clearance between the inner and outer teeth allows for a small amount of axial displacement of the two shafts (typically ±0.5 to ±3mm). Radial Offset: The top of the outer teeth is made into a spherical shape (with the center of the sphere on the axis), allowing for a certain angular deviation between the two shafts (typically ≤1°). Angular Offset: Through the sliding and rolling of the tooth surfaces, the angular errors between the two shafts are compensated. Buffering and Vibration Reduction: The lubricating oil fills between the teeth and can absorb some vibration and impact loads, reducing equipment noise.

Common Faults and Maintenance of 1635630500 Electromagnetic Valves in Atlas Copco Air Compressors Common faults of electromagnetic valves include coil burnout , valve core sticking , and aging of sealing components. During daily maintenance, the following points should be noted:Regularly check if the connection terminals are loose to avoid poor contact;Keep the valve body clean to prevent impurities from entering the valve core;When there is abnormal operation, it is recommended to replace the original electromagnetic valve to ensure performance compatibility. When replacing, pay attention to the consistency of voltage specifications and interface dimensions.

If you want to find out more about high quality Electronic Drain Kit 115V 2901146551, you are so lucky on the right page. We are one of  the most professional and first hand source supplier for genuine Original Atlas Copco parts and air compressor in China . Have more than 18 years of sales and maintenance experience in atlas copco air compressor field.