Atlas Copco DML 033 S Core Functions
Drying and Purification: By using adsorption or freeze-drying principles (depending on the technical type of the DML series), the dew point in the compressed air is reduced, while filter elements are used to remove oil mist, dust, and other impurities, ensuring that the output air quality meets the standards (usually reaching the specific level of ISO 8573-1). This also protects equipment by preventing moisture and contaminants from entering downstream pneumatic tools, instruments, or pipelines, reducing the risk of equipment wear, corrosion, and failure, and extending the service life of the pneumatic system.
Technical Parameters (Reference)
Processing Flow: Approximately 3.3 m³/min (specifically as per the product manual), suitable for small and medium-sized air compressor systems.
Working Pressure: Usually within the conventional pressure range of 7-10 bar in a compressed air system.
Dew Point Temperature: Depending on the drying method, the freeze-drying unit typically achieves a pressure dew point of 3°C, while the adsorption type can reach a lower temperature (such as -40°C), which should be referred to in the specific model description.
Interface Dimensions: The inlet and outlet dimensions match the corresponding piping, commonly DN25 or 1 inch (specifically as per the actual product).
Installation Method: Mostly in vertical or wall-mounted designs, saving installation space and facilitating integration into the compressed air system.
