China 2901187500 Manufacturer, Supplier, Factory

Atlas Copco 1625752501 Notes for Attention Original Equipment Advantage: The original equipment corresponding to this part number is fully compatible with the equipment in terms of size accuracy and filtration efficiency, ensuring the best filtration effect and reducing the risk of equipment damage caused by compatibility issues. Confirm Compatibility: Since the same part number may correspond to a specific model, before replacement, it is necessary to check the model and serial number of the air compressor, or consult an authorized Atlas Copco dealer to ensure the compatibility of the parts.

Atlas Copco Operating Instructions The 40°C setting value for Atlas Copco is an optimized parameter specific to certain models or working conditions. It cannot be adjusted at will. Otherwise, it may affect the temperature control accuracy, leading to reduced equipment operation efficiency or component damage. When replacing parts, choose Atlas Copco original accessories to ensure they match the temperature control logic and interface of the equipment. Avoid system failures caused by compatibility issues. For specific model compatibility or more detailed technical parameters, it is recommended to refer to the equipment manual or contact the Atlas Copco authorized service center for confirmation.

Correlation check: Verify that the cooler and the lubrication system are unobstructed to prevent premature damage to the temperature control kit due to blockage by other components. After replacement, it is recommended to shorten the initial oil change interval to ensure system cleanliness. The normal operation of the constant temperature kit directly affects the lubrication effect and lifespan of the air compressor. When replacing it, strictly follow the technical manual of the corresponding model.

Basic working principle A three-phase induction motor generates a rotating magnetic field by connecting to three-phase alternating current and passing it through the stator windings. The rotor cuts the magnetic lines of force in the magnetic field, generating an induced current, which is then subjected to electromagnetic force and rotates in accordance with the magnetic field (the rotational speed is slightly lower than that of the rotating magnetic field, and there is a slip rate). The electrical energy is converted into mechanical energy to drive the compression mechanism of the air compressor (such as pistons, screws, etc.) to operate. Adaptation features

Authorized Atlas Air Compressor Distributor in China

Installation and Maintenance Tips: Professional Installation: Operated by authorized technicians to ensure correct connection of the oil/gas interfaces and proper installation of the seals (especially for water-cooled models, prevent water leakage). Cleaning and Maintenance: Wind-cooled models: Regularly clean the surface dust and oil stains of the heat sinks (using compressed air blowing or special cleaning agents). Water-cooled models: Regularly check the water quality to prevent scale deposition (add scale inhibitors), and conduct at least one flushing cleaning per year. System Inspection: After replacing the cooler, check if the auxiliary components such as fans and water pumps (for water-cooled models) are functioning properly to ensure the effective Cooperation of the cooling system. The cooler kit is the core spare part for maintaining the thermal balance of the air compressor. Choosing original factory parts can maximize the guarantee of equipment performance and safety.