China Controller Manufacturer, Supplier, Factory

The rubber coupling used in 1604724701 Atlas Copco industrial compressors needs to be inspected regularly during maintenance for signs of aging, cracks, deformation or excessive wear. If any damage is found, it should be replaced immediately to prevent the failure of the coupling from causing transmission faults in the compressor and affecting the normal operation of the equipment. It is recommended to use Atlas Copco original factory parts for replacement to ensure compatibility with the equipment and performance.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

Atlas Copco 6231638800，The O-ring achieves sealing through elastic deformation. Its sealing force is jointly exerted by the system pressure and the initial compression force. The initial compression provides the basic sealing capability, and as the system pressure increases, the sealing force increases linearly, forming a self-sealing structure.

Atlas Copco is a world-leading industrial equipment manufacturer, with a century-long history and profound technical expertise in the field of air compressors. As a benchmark enterprise in the compressor industry, its products are renowned for their efficiency, reliability and innovation, and are widely used in various sectors such as manufacturing, energy, healthcare, and construction.

ATLAS COPCO GA160 Operating Instructions Before operation, please read the equipment manual to avoid mistakenly modifying critical parameters (such as excessive pressure limit). When a red fault alarm occurs, stop the machine for inspection first, eliminate the fault, and then restart it. Regularly clean the control panel to prevent dust or oil stains from affecting the sensitivity of the buttons.

Atlas Copco 0634100085，The coupling transmits the motor torque stably to the compressor rotor, ensuring the normal operation of the air compressor. This is its most fundamental function, applicable to high-power and high-speed scenarios. Overload protection: In case of abnormality in the motor or rotor, the coupling can quickly disconnect the connection to prevent equipment damage. Buffering and shock absorption: Absorbing vibrations and shocks caused by startup, shutdown or load changes, reducing equipment wear. Offset compensation It can compensate for axial, radial and angular offsets caused by manufacturing and installation errors, thermal expansion or deformation, ensuring the alignment accuracy of the shaft. Adaptability to complex working conditions High load/High speed: Suitable for high-torque and high-speed environments, ensuring the stability of the transmission system. Safe and reliable: Some couplings are designed with safety devices, automatically disconnecting the connection when the load exceeds the limit.