China Atlas Copco CONTROLLER Manufacturer, Supplier, Factory

Troubleshooting process Check the power supply: Use a multimeter to check if the power is normal and the voltage is stable. Check the coil: Measure the resistance of the coil to determine if it has burned out. Check the mechanical part of the valve: Remove the valve, check for any foreign objects blocking it and whether the spring is damaged. Check the control system: If it is an automatic drainage system, check if the timer or sensor is working properly. Pressure test: Test the opening and closing functions of the valve under system pressure.

Atlas Copco 2901066000，The intake valve of the air compressor is also known as the load reduction valve. When the compressor starts, the load reduction valve is in a closed state, thereby reducing the starting load of the compressor. During normal operation, the opening degree of the intake valve is controlled by using a proportional regulation method based on the changes in the exhaust pressure. The intake valve of the air compressor.

I.Main Components Included in the Set。 Air filter Filters out dust and impurities in the air to prevent them from entering the compressor. It is recommended to replace every 4000 hours to avoid blockage that leads to a decrease in air volume and increased energy consumption. Oil filter Filters impurities in the lubricating oil to protect key components such as bearings and gears. Blockage will cause an increase in oil pressure, triggering a protective shutdown. Oil-gas separator Separates the lubricating oil from the compressed air to ensure that the exhaust contains an acceptable amount of oil (typically ≤ 3ppm). Failure will result in increased fuel consumption, oil in the exhaust, and contamination of the after-treatment equipment. Lubricating oil Synthetic lubricants (such as the SynthOil series from Atlas Copco) provide lubrication, cooling and sealing functions. They need to be replaced every 4,000 hours. Old lubricants will reduce cooling efficiency and increase the risk of carbon deposits. Sealing kit Includes O-rings, gaskets, etc., to prevent leakage of lubricating oil and compressed air. Old sealing parts may cause a decrease in pressure or oil leakage. Other accessories Some packages may include belts (belt drive type), sensors, hoses, etc. II. Advantages of the Maintenance Package One-stop purchase: A single package covers all the replacement needs of key components, avoiding the omission of accessories. Original factory matching: Atlas Copco original accessories ensure perfect compatibility with the equipment, extending the service life. Cost-effectiveness: The package price is usually more favorable than purchasing accessories separately. Professional guidance: A detailed maintenance manual is included, guiding users on how to replace the accessories correctly.

Atlas Copco 2901063400,By relying on the gravitational force of the condensate water, when the condensate water accumulates to a certain height, the float or the weight is driven by gravity, pushing the valve to fully open and drain the condensate water, while preventing steam leakage. It is composed of components such as the valve body, valve core, and spring. The valve body has channels and sealing surfaces inside, and the valve core controls the gas flow. When the compressor is running, the gas flow is regulated by the shuttle valve to keep the channel open; 5 When the machine stops or the pressure reaches the set value, the shuttle valve closes rapidly to prevent gas backflow. The air compressor valves achieve gas control, oil circuit management and temperature protection through different physical principles, ensuring the efficient and safe operation of the equipment.

Atlas Copco 2906066000,The air compressor maintenance package protects the design of the air compressor, reduces equipment wear, maintains stability and extends lifespan: The maintenance includes air filters, oil filters, and oil-gas separators, etc. Regularly remove impurities to prevent blockages and ensure proper temperature operation. 2230000800,Original factory parts maintenance can avoid performance degradation and equipment damage of original factory parts, reduce the risk of thermal shutdown, and extend the overall lifespan. The entire maintenance package has a lower price and can be purchased in bulk. It optimizes inventory management and reduces costs caused by downtime.