China Atlas Copco 1420070853 Manufacturer, Supplier, Factory

1900520013 This controller is equipped with 3G connection functionality. It enables the machine to be connected to the cloud without any additional cost, facilitating users to conduct remote monitoring and management through Atlas Copco's Smartlink 2.0 monitoring system, thereby helping factories advance towards Industry 4.0.

If you need to purchase or confirm the specific compatible model, it is recommended to provide the complete model number of the compressor (such as GA22, GA37, etc.), and refer to the corresponding number in the official Atlas Copco spare parts catalogue to ensure complete compatibility of the kit with the equipment. Regular replacement of the original filter kit is an important maintenance measure for maintaining the performance of the compressor and extending its service life.

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Maintenance and replacement precautions for LDI drain valves of Atlas Copco air compressors Regularly check the working condition of the drain valve, observe whether the drainage is smooth, and avoid failure of drainage due to blockage by impurities (manual drainage can be performed periodically for auxiliary cleaning). If there is continuous leakage or inability to drain, the sealing parts or the entire valve body should be replaced in time to avoid affecting the quality of compressed air. When replacing, select the compatible model to ensure that the pressure grade, interface size, and equipment are matched; before installation, the system pressure should be emptied to prevent fluid ejection. Before long-term shutdown, it is recommended to manually discharge the residual water in the system to protect the drain valve and pipeline from corrosion.

Attention for the suction control valve of Atlas Copco air compressors: After replacing or repairing the suction control valve, it is necessary to recalibrate the pressure setting value to ensure it matches the system requirements. Avoid using non-original factory parts to prevent abnormal operation of the compressor due to size deviations or material issues.

Atlas Copco CD5-22 Control Valve Maintenance and Precautions Regular Inspection: Regularly check if the valve has any air leakage, jamming or pressure adjustment failure. If abnormal pressure fluctuations or slow response are detected, it may be due to aging internal seals or blockage by impurities. Cleaning and Replacement: During maintenance, the valve body can be disassembled (requiring professional operation). Clean the internal valve core and valve seat, replace the aged seals; if the valve core is severely worn, it is recommended to replace the control valve as a whole to ensure performance. Parameter Matching: When replacing, confirm that the pressure adjustment range, interface size of the new valve match the original system, to avoid control failure due to incompatible specifications.