China 1420070853 Atlas Copco Manufacturer, Supplier, Factory

All these filter components must be equipped with original Atlas Copco parts to ensure filtration efficiency and equipment compatibility. During maintenance, it is necessary to check and replace them according to the specified cycle in the equipment manual to avoid equipment failure due to filter failure.

Atlas Copco Gear Maintenance Tips Regular Inspection: Observe the condition of the gear tooth surface, measure the tooth clearance, and replace them immediately if any abnormalities are found. Lubrication Management: Use dedicated gear oil (or air compressor-specific oil), replace it regularly, and keep the oil level normal to avoid oil contamination. Installation Calibration: Ensure that the parallelism and perpendicularity of the gear shaft meet the requirements, and avoid uneven load operation. Load Control: Prevent the air compressor from operating under long-term overloading conditions, and reduce the fatigue damage to the gears. The design and maintenance of air compressor gears are crucial for the overall performance of the machine. High-precision gear combinations with a good lubrication system can significantly reduce operating noise, extend service life, and ensure the efficient and stable operation of the air compressor.

The advantage that ATLAS COPCO takes in choosing the original X2 kit 8K lies in its matching filtration efficiency, dimensional accuracy with the Atlas Copco air compressor, which can maximize the filtration effect and reduce the risk of equipment failure caused by incompatible filter elements. During daily maintenance, timely replacement of the oil filter is one of the key steps to maintaining the efficient and stable operation of the air compressor.

Fault and Replacement Suggestions: If the fuel injection valve becomes clogged, stuck, or leaks, it may cause the following issues: Insufficient fuel injection: Poor lubrication of the main engine, increased temperature, leading to rotor wear or abnormal noise; Excessive fuel injection: Increased oil content in the compressed air, heavier load on the oil separator, and increased energy consumption; Uneven fuel injection: Insufficient lubrication in some parts of the rotor, resulting in uneven wear or overheating. Suggestions: During daily maintenance, check if there is any oil accumulation on the fuel injection valve and clean the filter regularly (if applicable); When encountering abnormal engine temperature, increased fuel consumption, or abnormal noise, promptly inspect the condition of the fuel injection valve;

Maintenance cycle and failure manifestations of the transmission shaft seal kit for Atlas Copco air compressors: It is recommended to inspect once every 8,000 - 12,000 operating hours, or replace it immediately if there is oil leakage on the outside of the machine body. Failure symptoms: Oil leakage (oil type), abnormal loss of compressed air, abnormal noise from bearings (caused by impurities intrusion) If you need specific part information, please provide the complete model of the air compressor (such as GA22 VSD) and the production year, so that we can accurately query the specifications and replacement manual of the original Atlas Copco seal kit.

Common models Different models of Atlas Copco air compressors correspond to different overhaul kit models. For example, the overhaul package for the ZT110 - 145 + IMD300 Atlas oil-free air compressor has the model 3001160217. The overhaul kits for the ZR110 - 145 and ZT110 - 145 models of air compressors have models such as 8000-hour overhaul kits.