China 2906073900 Atlas Copco Manufacturer, Supplier, Factory

Atlas Copco 2906067800,The Atlas Copco air compressor oil pump is the core component of the lubrication system for air compressors. It ensures the normal operation and long lifespan of the air compressor by providing stable, clean and pressure-appropriate lubricating oil. Its main function is to supply lubricating oil to various bearings and moving parts of the air compressor, playing roles such as lubrication and friction reduction, cooling and temperature reduction, sealing and leak prevention, cleaning and flushing, and vibration reduction and buffering.

The 4000-hour oil filter usage recommendation for Atlas Copco: It is necessary to replace the filter according to the equipment manual, taking into account the operating time and actual oil condition. Even if it has not reached 4000 hours, if you find that the filter is clogged or the pressure difference is too high, you should replace it promptly. When replacing, it is necessary to use original factory parts to ensure the filtering performance and equipment safety. Avoiding failures such as main unit wear caused by inferior filters.

The air compressor oil separator is a crucial component in the air compressor system, used to separate oil droplets and oil mist from the compressed air. It ensures the purity of the compressed air and enables the recycling and reuse of the lubricating oil.

Atlas Copco 2906039200 ,The principle of the air compressor maintenance kit: Replace worn parts, perform maintenance and troubleshooting, ensure safety,Air filter element Remove garbage from the bottom. The filter with grease needs to be soaked in foam-free detergent. Damaged filters need to be replaced. Oil separator To ensure high efficiency of oil-gas separation, it is necessary to pass the compressed gas from the collision and gravity separation compressor through the oil separation process. Safety valve It is necessary to ensure the quality and safety of pressure vessels. Professional adjustments are required. Lubrication system Test the oil quality with screw oil and maintain the lubrication of bearings and the lifespan of the compressor Maintenance process standardization 1. Shut down and power off: Turn off the power and hang warning signs 2. System depressurization: Close the water supply and gas supply valves 3. Disassembly and inspection: Use tools to disassemble the components. It is necessary to check the rotor alignment status and bearing damage 4. Component maintenance: Replace the filter and lubricate, etc

Atlas Copco Common Problems and Solutions Slip and Abnormal Noise: This is often caused by loose belts, oil contamination, or wear on the pulley grooves. Adjust the tension, clean, or replace the pulley. Excessive Breakage: This may be due to excessive tension, incorrect belt type, misaligned pulley grooves, or excessive load. Check and adjust as necessary. Severe Heating: This is usually caused by slipping or poor heat dissipation. Stop the machine immediately for inspection.

Atlas Copco Air compressor LOCKNUT The locking nut of the air compressor is an important fastening component used to fix the key parts and prevent loosening. Especially in scenarios where there is vibration and pressure variation during the operation of the equipment, its role becomes even more crucial.