China 2906073900 Manufacturer, Supplier, Factory

Choosing the Atlas Copco 8000 hour service package is an important measure to ensure the long-term and efficient operation of the compressor. It is particularly suitable for industries that require continuous production (such as manufacturing and energy industries), and through regular maintenance, it can minimize the overall maintenance cost of the equipment.

Common Problems and Maintenance Suggestions Oil deterioration: manifested as darker color (turning brown or black), the appearance of sludge, emulsification (becoming milky white). This is mostly caused by high-temperature oxidation, water contamination or pollution. It is necessary to replace the oil immediately and investigate the causes (such as cooling system failure, breathing device blockage). Abnormal increase in fuel consumption: may be due to the failure of the oil separator, clogging of the return oil pipe or damage to the sealing parts. It is necessary to check the relevant components and replace them. Selection Principles: Only Atlas Copco original oil or certified equivalent oil products must be used. Inferior oil will lead to severe carbon deposits, accelerated bearing wear, and even cause major failures such as engine stalling.

1629054716 Atlas Copco FILTER ELEMENT DD/DDP 780-3150+ F is equipped with highly efficient filtering materials, which can effectively trap tiny particles in the air and reduce equipment wear and malfunctions caused by air pollution.

The GA FLX compressor can operate at the lowest motor speed during operation, and it can also run at pressures lower than the rated pressure. This feature can significantly reduce energy consumption and achieve an energy efficiency of less than 20%. This compressor can meet the IE5 standard of FASR motors, making it a leader in the efficiency category. The high energy efficiency, efficient power output system, and electronic control unit support these features. These characteristics enable the GA FLX to operate without energy loss under any pressure setting.

Order will be placed on standard delivery conditions. After the order is placed, an order acknowledgement and tracking information will be provided to you by email.

Atlas Copco Maintenance Tips: Regular Inspection: Remove the cylinder cover and clean the valve surface of oil stains and carbon deposits (especially for piston-type air compressors, as high-temperature lubricating oil can easily cause carbon deposits); Replace Wear Parts: Valve plates, springs, sealing gaskets, etc. are considered wear parts. When wear, deformation or aging is detected, they should be replaced in time; Keep Clean: Avoid introducing impurities during installation. The filter device of the intake system needs regular maintenance to reduce dust entering the cylinder. Although the cylinder cover valve is a small component, it directly affects the compression efficiency and operational stability of the entire machine. During daily maintenance, special attention should be paid to its sealing performance and operational flexibility. If any abnormalities occur, timely repairs should be carried out to extend the service life of the air compressor.