China Atlas Copco 2906073900 Manufacturer, Supplier, Factory

Common reference for the accessory numbers of the Atlas Copco WIS series pressure reducing valves: Some models may use the pressure reducing valve with the part number 2901126000 (which requires matching specific pressure parameters)

Strict model matching: Different series of Atlas Copco air compressors (such as fixed type, mobile type, screw type, etc.) may require different specifications of coolant. Please select the corresponding original factory coolant based on the specific model of the equipment (such as GA75, XAS186, etc.). For example, some models use long-lasting coolant, with a replacement cycle of up to 8,000 - 10,000 hours. It is not allowed to mix this coolant with other brands or types of coolant at will.

Atlas Copco also offers a series of oil coalescing filters such as DD+, PD+, and UD+. These filters can effectively reduce oil suspended matter, wet dust, and water droplets in the compressed air flow. Among them, DD+ is used for filtering oil suspended matter and wet dust; PD+ not only filters oil suspended matter and wet dust, but also can perform water separation; UD+ integrates the two filtration steps of DD+ and PD+ into one technology, which can save space and energy.

Usage and Maintenance Notes Strictly match the model Different series of air compressors (such as GA, GHS, ZR, etc.) require the use of corresponding model-specific oils. Mixing or using the wrong type may cause equipment damage and affect warranty. Regular replacement and inspection Replace according to the specified cycle in the equipment manual (synthetic oil usually has a longer cycle than mineral oil), and replace oil filters, air filters, etc. at the same time. Regularly test the oil quality (such as viscosity, moisture content, impurity content) to avoid failures caused by deteriorated oil. Storage and refilling The oil needs to be stored in a sealed manner in a cool and dry place to avoid contamination; when refilling, ensure that the tools are clean to prevent impurities from entering the oil circuit system.

Maintenance and Replacement Suggestions for Air Filters of Atlas Copco Screw Air Compressors Replacement Cycle: Generally, it is recommended to replace the air filter according to the specified cycle in the equipment maintenance manual (such as after 2000-4000 hours of operation, which may vary depending on the model and usage environment). If the dust concentration in the usage environment is high (such as in mines or cement plants), the replacement cycle should be shortened. Inspection Method: Regularly (e.g., weekly) check the cleanliness of the air filter. You can determine if it is clogged by using a pressure differential indicator (available on some models) — when the indicator value exceeds the set threshold, it is necessary to replace it promptly. Replacement Precautions: During replacement, ensure proper installation and good sealing; avoid allowing impurities to fall into the intake pipe during disassembly and assembly. After replacement, check for any leakage.

The GA90 and GA110VSD screw air compressors from Atlas Copco are equipped with various filter component replacement and purchase suggestions. Model matching: It is essential to use Atlas Copco original or certified filter components (you can query the corresponding model by the equipment serial number). Non-original accessories may cause equipment failure due to non-compliant size and material. Replacement cycle: Refer to the equipment manual and make a comprehensive judgment based on operating hours, environmental dust concentration, oil quality status, etc. In harsh environments, the cycle should be shortened. Purchase channel: Through Atlas Copco, we ensure genuine products and after-sales service.