China G2 air compressor Manufacturer, Supplier, Factory

By using the original Atlas Copco filter kits or service kits, the failure rate of the equipment can be effectively reduced, its service life can be prolonged, and the quality of compressed air can be maintained. This is particularly suitable for industrial scenarios where high reliability of equipment is required.

The solenoid valve of the air compressor is a key component for controlling the flow direction, on-off and system protection of compressed air. It is mainly divided into two types: loading solenoid valves and venting solenoid valves.

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering Catch Cans, the AOS-R (Air Oil Separator, Return) is responsible for keeping blow-by oil and other pollutants out of the air intake, intercooler, manifold, etc. The main difference is that an AOS-R system returns oil back into the pan above the oil level. This permits a service-free system.

Atlas Copco 2901186500,Reducing gas temperature in multi-stage compression process, after the gas passes through the previous stage of compression, its temperature will rise sharply. The intercooler is located between the compression stages and can cool the high-temperature gas, providing lower-temperature and denser gas for the next stage of compression. Enhancing system efficiency The cooling process makes the compression process closer to isothermal compression, thereby reducing power consumption and improving the operational efficiency and economy of the entire compressor system. Separating condensate When the gas temperature drops, the water vapor and oil-gas mixture contained therein will condense. Some lubricating oil and water will condense into droplets, which can then be separated out, making the output compressed air cleaner. By effectively controlling the gas temperature, risks such as lubricant failure, equipment component damage, and even explosion caused by excessively high temperatures can be prevented. At the same time, the pollution risks to downstream equipment and pipelines can also be reduced.

The air compressor pressure sensor is for installation and maintenance. Installation location: It is usually installed at the outlet of the storage tank, the exhaust port of the compressor, or on the main pipeline to ensure that the sensor can accurately reflect the system pressure and avoid direct exposure to high temperatures, oil stains, or severe vibrations. Regular calibration: To ensure measurement accuracy, the sensor should be calibrated regularly (generally once or twice a year) to prevent control failure due to drift. Daily inspection: Check if the sensor wiring is loose and the seal is good to avoid affecting measurement accuracy due to air leakage or poor contact; if any abnormal display or no signal output is found for the sensor, it is necessary to promptly troubleshoot the fault or replace it.

Atlas Copco Heavy Duty Screw Element C168 pin:1616725691-1616725681 When you are searching for the genuine Airend for Atlas Copco Heavy Duty Compressors , Part numbers: “P/N 1616725691-1616725681 Air End” or any other screw elements, you are lucky to find Taike China. With our own distribution network, our prices are unbeatable in China.You can rest assured to buy Atlas Copco 1616734582 - 1616734592 C190 Screw Element from our factory.