China Atlas Copco Oring parts Manufacturer, Supplier, Factory

The working principle of the constant temperature valve for Atlas Copco air compressors: When the air compressor starts, the oil temperature is low. The constant temperature valve will close the oil circuit of the cooler, allowing the lubricating fluid to directly enter the main unit, rapidly increasing the temperature and reducing wear. When the temperature rises to 70-80 degrees Celsius, the constant temperature valve will slowly open the cooling channel of the cooler, allowing the lubricating oil to cool down before entering the circulation. This can prevent the oil temperature from being too high, which would lead to a decrease in lubrication effect and overheating problems of the equipment.

Atlas Copco Check Valve Kit Common Faults and Maintenance Leakage: This is often caused by worn sealing surfaces, debris blocking, or failed springs. It requires disassembly for cleaning, grinding the sealing surfaces, or replacing the components. Stalling: Oil and impurities in the compressed air may cause the valve core to get stuck. Regular checks and cleanings should be conducted, and air filters should be maintained more frequently. Strange noises: Collisions between the valve core and the valve seat or loose springs may produce noises. The tightness of the components and wear conditions should be checked. Regularly (suggested every 2000-3000 hours of operation) inspecting, cleaning, and conducting performance tests on the check valve assembly of Atlas Copco Check Valve Kit is an important measure to ensure the efficient operation of screw machines.

Attention to the Atlas Copco Adsorption Dryer Silencer: During installation, ensure that the sealing gasket is intact to prevent air leakage, which could lead to increased noise and reduced regeneration efficiency; Do not replace it with an incompatible model at will (for example, if the diameter is too small, it will cause excessive exhaust resistance, affecting the regeneration effect of the adsorbent); The original factory silencer is usually designed with acoustic optimization, not only providing better noise reduction effects, but also ensuring the smoothness of the regeneration exhaust and maintaining the normal cycle of the dryer.

Atlas Copco's original oil cooler replacement and maintenance suggestions for ZA ZR5-6 screw air compressors When abnormal oil temperature rise, cooling effect decline or cooler leakage occur, it is necessary to promptly inspect and replace the oil cooler. It is recommended to choose original parts to ensure compatibility and performance. During the replacement process, follow the equipment maintenance manual's specifications to ensure a good installation seal and avoid oil leakage or air entering the system.

The air compressor pressure valve (also known as pressure control valve or pressure regulating valve) is a key component in the air compressor system used for controlling and regulating pressure. Its main function is to maintain the stability of pressure within the system, protect the safe operation of the equipment, and enable the automatic loading/unloading function of the air compressor.

Installation advantages: The design features a snap-in mechanism, making installation and disassembly easy. This helps enhance the efficiency of pipeline maintenance while ensuring a tight connection and reducing the risk of leakage.