China atlas copco ga 55 air compressor spare parts Manufacturer, Supplier, Factory

Maintenance suggestions for the sliding sealing components of Atlas Copco air compressors: Regularly inspect the wear condition of the sealing parts (such as the opening gap of the piston ring, the leakage volume of the piston rod seal); Atlas Copco Ensure the normal operation of the lubrication system (oil mist lubrication or solid lubricant in no-oil conditions); Atlas Copco Filter the intake air (reduce dust and other impurities); When replacing the sealing parts, select the model and material that match the working conditions and ensure the installation accuracy.

Attention points for pressure reducers in Atlas Copco air compressor systems: Matching system pressure: The rated input pressure of the pressure reducer must match the exhaust pressure of the air compressor (for example, if the rated pressure of the air compressor is 10 bar, a pressure reducer with a rated input of ≥ 10 bar should be selected). Downstream load limit: The output pressure should be set according to the rated working pressure of the downstream equipment to avoid overpressure damage to the equipment. Regular calibration: After long-term use, pressure drift may occur, so it is necessary to regularly check and calibrate to ensure stable pressure.

The Importance of the Air Intake Valve in Atlas Copco Air Compressors and Its Connection to Energy Saving The adjustment accuracy of the intake valve directly affects the energy consumption of the air compressor: If the intake valve is not closed tightly , the air compressor will still consume additional power during unloading (about 30% - 50% of full load), and long-term operation will significantly increase electricity costs. The slide valve type and other continuously variable intake valves can adjust the intake volume in real time according to the actual gas consumption, and are 10% - 20% more energy-efficient than traditional butterfly valve types . In summary, the intake valve is the "breathing valve" of the air compressor. Its performance and condition are crucial to the operating efficiency, energy consumption, and stability of the equipment. Regular maintenance and correct selection are the key to ensuring the economic operation of the air compressor.

2901187500 Atlas Copco uses the original Atlas Copco PM accessories for preventive maintenance of the air compressors, which can maintain the performance and reliability of the air compressors, extend the service life of the equipment, reduce equipment failures and downtime, and lower maintenance costs. At the same time, the original accessories comply with the quality standards and warranty requirements of 2901187500 Atlas Copco, ensuring that the equipment receives effective warranty services during the warranty period.

Common Issues and Maintenance of Atlas Copco Air Compressor Pressure Sensors Common issues with pressure sensors include measurement drift (inaccurate data), signal interruption (line or component failure), interface leakage, etc. Maintenance suggestions: Regularly check the sealing of the sensor installation to avoid pressure leakage or measurement errors due to looseness; Keep the sensor interface clean to prevent oil contamination and impurities from blocking and affecting the measurement; When there is abnormal pressure display, frequent start-stop of the unit, or incorrect pressure protection operation, it is necessary to check if the sensor is faulty. It is recommended to replace the original sensor to ensure performance matching. When replacing, pay attention to keeping the calibration parameters consistent with the original model.

As an air compressor manufacturer, we often receive inquiries from customers. The company wants to purchase a batch of air compressors but doesn’t know how to choose or how to make reference. Here we summarize for you how to choose a suitable air compressor in general.