China Atlas Copco Filter Manufacturer, Supplier, Factory

Maintenance and Replacement Suggestions for Atlas Copco Oil Coolers Regular Cleaning: For air-cooled coolers, clean the dust and oil stains on the fins regularly. For water-cooled ones, check if the water channels are blocked or clogged to ensure the cooling effect. Leak Check: During daily inspections, observe if there are oil stains on the surface and interface of the cooler. If leakage is detected, replace the sealing parts or the entire kit promptly. Replacement Timing: When the cooler shows severe corrosion, large-scale damage to the fins, or internal blockage causing abnormal oil temperature rise , it is recommended to replace the entire kit. Preferentially use Atlas Copco original accessories to ensure compatibility with the unit and cooling performance. The reliable operation of this kit directly affects the energy consumption, stability, and service life of the oil-free air compressor, and is an important guarantee for maintaining the efficient operation of the unit.

Quick conclusions and suggestions for Atlas Copco air compressors using ball bearings The original factory / joint design of four-point contact ball bearings on the oil-free main shaft ensure positioning accuracy and lifespan. The motor end uses protective bearings that are compatible with the frequency converter. Emphasize lubrication and grounding / insulation to reduce the risk of bearing current. Replace based on the machine nameplate and serial number as the standard, avoid blindly replacing based solely on the "universal replacement number".

The main function of the automatic drainage valve water for Atlas Copco air compressors The automatic drainage valve water kit, through built-in sensors or mechanical structures, detects the presence of condensate water and automatically opens the drainage channel to discharge the water outside the system. No manual operation is required, and it is particularly suitable for equipment that is prone to generating condensate water, such as air compressor storage tanks, dryers, filters, and post-coolers.

The 8000-hour maintenance kit for the Atlas Copco IMD260 air compressor may vary slightly in specific component quantity and model depending on the supplier or original factory providing the maintenance kit. For accurate kit contents and detailed information, it is recommended to contact us directly, providing the specific model and serial number of the air compressor to obtain the most precise maintenance kit-related materials.

ATLAS COPCO "8000 Hours Service Maintenance Kit" Purchase and Replacement Key Points Verify "Model + Serial Number" to confirm the part number with the service manual and the spare parts list. Prefer original factory or certified accessories. Replace according to the steps in the service manual. Pay attention to torque, sealing, exhaust and fluid replenishment procedures. After completion, record and reset the maintenance timer. In harsh environments or high-load conditions, it can be shortened to 6000 - 7000 hours; pay attention to condensation and drain valve maintenance in humid environments. If abnormal sounds, vibrations, temperature or pressure occur after replacement, immediately shut down the machine for inspection and contact the service team.

Atlas Copco also offers other types and specifications of lubricants, such as Roto Inject NDURANCE mineral oil-based compressor oil suitable for GA-GX rotary screw compressors.