Genuine 1622065800 Atlas Copco air compressor Part Air Filter

For Atlas Copco Maintenance and Replacement Recommendations

Replacement Cycle: Generally, it is recommended to replace the filter according to the specified cycle in the unit maintenance manual . If the dust concentration in the usage environment is high, the replacement cycle should be shortened .

Condition Judgment: Some models are equipped with an air filter pressure differential indicator. When the indicator value exceeds the set threshold, it indicates that the filter is clogged and needs to be replaced immediately; without an indicator, regularly disassemble and inspect the accumulated dust on the filter material surface. If it is obviously clogged or damaged, replace it immediately.

Replacement Precautions:

Before replacement, the unit must be shut down and the power disconnected to ensure safety.

During installation, clean the impurities around the air inlet to avoid contaminants from falling into the air intake pipe during disassembly and assembly.

Ensure that the filter is properly sealed with the housing to prevent unfiltered air from directly entering the compressor.

新闻内容

For Atlas Copco's main functions and design features

Efficient filtration performance: Utilizing multi-layer composite filter materials (such as glass fiber, polyester fiber or paper filter elements), the filtration accuracy typically reaches over 99.9% (for particles ≥ 1μm), effectively intercepting dust, sand, and other impurities in the air, ensuring the cleanliness of the air entering the compression chamber, and protecting the main unit from wear.

Dust holding capacity optimization: The filter material structure design focuses on dust holding capacity, allowing for the accommodation of a large amount of pollutants without significantly increasing intake resistance, extending the replacement cycle and reducing maintenance frequency.

Low resistance characteristics: Through optimizing the pore distribution of the filter material and the air passage design, while maintaining filtration efficiency, the air flow resistance is reduced, the energy consumption of the compressor during suction is decreased, and the volumetric efficiency and gas production capacity of the unit are maintained.

Oil resistance and adaptability: Some filter housing shells are made of oil-resistant rubber seals or metal materials, capable of adapting to the oil spray-type compressor working environment where it may come into contact with oil, humidity, etc., ensuring reliable sealing and preventing unfiltered air from bypassing into the system.

Precise compatibility: Designed for different models of oil spray-type screw compressors (such as GA series, G series, ZR series, etc.), the dimensions, installation interfaces (such as snap fits, flanges or threaded connections) are fully matched with the compressor's intake system, ensuring convenient installation and tight sealing.

Applicable models and applications

Widely used in Atlas Copco's various series of oil spray-type screw compressors, such as:

Small and medium-sized fixed-type models (such as GA37, GA75, etc.)

Large industrial-grade models (such as GA160, GA315, etc.)

Some mobile oil spray screw compressors

Specific models need to be determined based on the displacement, intake volume of the compressor and the original part number of the manufacturer.