China Atlas Copco FILTER KIT DD/DDP 130+ Manufacturer, Supplier, Factory

There are probably several common faults of air compressors, and at the same time, these faults have some corresponding solutions:

Atlas Copco Air Compressors ANGLE SEAT VALVE Maintenance and Replacement: After long-term use, the sealing performance should be checked. If leakage occurs, the valve core or sealing parts should be replaced promptly. It is recommended to use the original Atlas Copco angle valve to ensure compatibility with the system and service life. If purchasing or replacing, it is recommended to provide the specific model of the air compressor (such as GA75, G250, etc.) and the pipe size, so as to precisely match the appropriate accessories.

2200599743 Atlas Copco Air Compressor CHECK VALVE + PIPE D.6 Maintenance Advice: Regularly check the sealing performance of the one-way valve. If there is air leakage or jamming, it is necessary to replace it in time. Especially in 6mm such small-diameter pipelines, impurities are more likely to cause the valve core to get clogged. If you need specific information about the one-way valve parts, it is recommended to provide the specific model of the air compressor (such as GA, GX series, etc.) so that the accurate compatible part parameters can be queried.

Procurement and Adaptation When procuring, the model of the compressor (such as GA30, GX7), component serial number or installation location (such as the bottom of the oil-gas separator, the drain port of the gas storage tank) should be provided. Obtain the adapted components through the official authorized channels to avoid functional failure due to size or material mismatch. The stable operation of the spherical float valve is crucial for the medium separation efficiency of the air compressor and the safety of the system. Regular maintenance and timely replacement can effectively reduce equipment failures and problems with the quality of compressed air.

The 4000-hour maintenance kit of Atlas Copco is applicable in the following scenarios: It is mainly used for regular preventive maintenance when the compressor operates for about 4000 hours. It is one of the recommended maintenance cycles by Atlas Copco, and is particularly suitable for industrial scenarios where continuous operation of the equipment is required. By regularly replacing the components within the kit, it can effectively prevent the decline in compressor efficiency, increase in energy consumption, or equipment failure and shutdown caused by filter failure, oil aging, or poor sealing.

Atlas Copco Maintenance and Replacement: Regularly inspect the wear, deformation or aging of the special-shaped rings . Replace them immediately if any abnormalities are found. When replacing, it is necessary to use the original or the same specification special-shaped rings. Standard rings cannot be used as substitutes . During the disassembly and installation process, avoid hitting the weak parts of the special-shaped rings, to prevent deformation and damage. Although the special-shaped rings of the air compressor are not universal, they play an irreplaceable role in special structural parts. Their design and manufacturing need to strictly match the specific requirements of the equipment, and special attention should be paid to precision and directionality during installation and maintenance to ensure the coordinated operation of all complex components of the air compressor.