China Atlas Copco 2202929400 Manufacturer, Supplier, Factory

The Importance of the Air Intake Valve in Atlas Copco Air Compressors and Its Connection to Energy Saving The adjustment accuracy of the intake valve directly affects the energy consumption of the air compressor: If the intake valve is not closed tightly , the air compressor will still consume additional power during unloading (about 30% - 50% of full load), and long-term operation will significantly increase electricity costs. The slide valve type and other continuously variable intake valves can adjust the intake volume in real time according to the actual gas consumption, and are 10% - 20% more energy-efficient than traditional butterfly valve types . In summary, the intake valve is the "breathing valve" of the air compressor. Its performance and condition are crucial to the operating efficiency, energy consumption, and stability of the equipment. Regular maintenance and correct selection are the key to ensuring the economic operation of the air compressor.

ATLAS COPCO PT1000 Operating Instructions Operators should be familiar with the meanings of fault codes (refer to the equipment manual) to quickly identify and solve problems. The adjustment of key parameters such as pressure should be within the rated range of the equipment to avoid overpressure operation and potential safety risks. Regularly check the connection lines of the controller to prevent signal transmission interference caused by vibration and oil contamination.

The air compressor oil filter is a key component of the lubrication system of an air compressor. It is mainly used to filter impurities, particles and contaminants in the lubricating oil, ensuring that the lubricating oil entering the compressor meets the cleanliness standards, thereby protecting the internal components of the compressor (such as bearings, gears, rotors, etc.) from wear and damage, and extending the service life of the equipment. Core functions Impurity filtration Intercept solid particles such as metal debris, dust, and carbon deposits, preventing them from circulating into the working components of the compressor. System protection Reduce friction and wear, lower the risk of faults caused by contaminants, and improve the reliability of the compressor. Oil life extension Remove oxidation products and moisture, delay the aging and deterioration of the lubricating oil, and reduce the frequency of oil replacement.

The main functions of Atlas Copco's MK5S boost unit kit The MK5S boost unit kit utilizes the mechanical boosting principle to increase the output pressure of the existing compressed air system to a higher level (usually by a certain proportion based on the original pressure, depending on the system configuration), suitable for equipment that requires intermittent or localized high-pressure air sources, such as pneumatic tools, precision instruments, high-pressure testing devices, etc. It does not require the separate configuration of a high-pressure air compressor for local needs, thereby saving equipment costs and installation space.

Maintenance and Care Regularly replace filters: air filter, oil filter, oil-gas separator. Prevent impurities from entering the system. Check the lubricating oil: oil level, oil quality (oxidation, emulsification). Replace the oil according to the manufacturer's recommended schedule. Clean the cooling system: For air-cooled models, clean the radiator regularly; for water-cooled models, check the water quality and temperature. Tighten bolts: Prevent vibration from causing bolts to loosen, which may lead to safety hazards. Monitor operating parameters: Regularly record exhaust temperature, pressure, current, etc. Address any abnormalities promptly.

Common reference for the accessory numbers of the Atlas Copco WIS series pressure reducing valves: Some models may use the pressure reducing valve with the part number 2901126000 (which requires matching specific pressure parameters)