China 2906013000 Manufacturer, Supplier, Factory

Order will be placed on standard delivery conditions. After the order is placed, an order acknowledgement and tracking information will be provided to you by email.

Atlas Copco 2901066000，The intake valve of the air compressor is also known as the load reduction valve. When the compressor starts, the load reduction valve is in a closed state, thereby reducing the starting load of the compressor. During normal operation, the opening degree of the intake valve is controlled by using a proportional regulation method based on the changes in the exhaust pressure. The intake valve of the air compressor.

Atlas Copco 2906062400,The main oil pump in the oil pump kit is responsible for delivering lubricating oil to all moving parts of the air compressor, forming an oil film to reduce friction and wear, and ensuring the efficient and stable operation of the equipment. The oil filter is integrated within the oil pump kit and is used to intercept and remove impurities from the lubricating oil, preventing particles from damaging the mechanical components and maintaining the cleanliness of the oil. The oil pump kit usually comes with an oil cooler to regulate the oil temperature and prevent the decline in lubrication performance due to high temperatures. At the same time, an electric heater heats the oil in low-temperature environments to ensure the normal startup of the oil pump. The auxiliary oil pump serves as a backup system and automatically starts when the pressure of the main oil pump is insufficient, ensuring adequate lubrication before the air compressor starts. Additionally, the oil pump kit optimizes the oil supply process through a linkage control mechanism to enhance overall reliability.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

Atlas Copco 1604530702,The main functions of lubricating oil are lubrication and reduction of friction. It forms a protective film between moving parts, reduces the friction coefficient, minimizes wear, and extends the lifespan of equipment. It also cools and dissipates heat, absorbs and removes the heat generated by friction, prevents the equipment from overheating, and ensures stable operation. It seals and prevents leakage, fills the gaps between components to prevent gas leakage and impurities from entering, and improves the sealing performance. It prevents rust and corrosion, forms a protective film on the metal surface to resist oxidation and water erosion, and avoids rusting. It cleans and buffers, removes impurities and deposits them at the bottom of the oil tank, and absorbs impact loads to reduce vibration.

Atlas Copco 2901067000,Based on the parameters set by the user, the air compressor automatically adjusts its start/stop, pressure maintenance and displacement to ensure that the output pressure remains within the set range.Through sensors, real-time pressure, temperature and other parameters are monitored, and the motor speed or valve opening is dynamically adjusted to optimize gas production efficiency. Support for network control of multiple air compressors, automatic task allocation based on load changes, and balancing of each unit's load to reduce gas demand fluctuations. Using predictive control algorithms, changes in gas consumption are predicted in advance, enabling intelligent loading/unloading and improving overall energy efficiency.