China 2906013000 ZA/ZR5-6 OIL COOLER KIT Manufacturer, Supplier, Factory

Maintenance suggestions for the sliding sealing components of Atlas Copco air compressors: Regularly inspect the wear condition of the sealing parts (such as the opening gap of the piston ring, the leakage volume of the piston rod seal); Atlas Copco Ensure the normal operation of the lubrication system (oil mist lubrication or solid lubricant in no-oil conditions); Atlas Copco Filter the intake air (reduce dust and other impurities); When replacing the sealing parts, select the model and material that match the working conditions and ensure the installation accuracy.

1622908920 The internal structure of the Atlas Copco check valve is equipped with a valve core, which only allows the lubricating oil to flow in the preset direction. When the oil flow direction is reversed, the valve core will automatically close the channel to prevent backflow. When the compressor stops, the oil pressure in the system drops sharply. Without the 1622908920 Atlas Copco check valve, the lubricating oil may flow in the opposite direction due to gravity or residual system pressure, causing the internal components of the main unit and bearing parts to experience dry friction when the compressor starts up again, thereby accelerating wear.

1. loading solenoid valve ‌ : It adopts a two-position three-position normally closed structure and controls the on-off of the pipeline from the oil and gas tank to the intake valve through PLC instructions. When powered on, allow compressed air to enter the intake valve pipeline and open the intake port. When power is cut off, cut off the air passage and expel the residual air in the cylinder, then close the air inlet 2. Vent solenoid valve ‌ : Open the valve for two positions and two normal positions to ensure that the pressure in the oil and gas tank of the air compressor remains at around 0.2MPa when it is no-load. When the machine is shut down and unloaded, cut off the power and release the gas to the intake filter to prevent excessive pressure

Notes for Attention Regular inspection: The pressure relief valve should be subject to regular functional checks and calibrations to ensure it operates properly in case of abnormal pressure, preventing failure due to issues such as valve core jamming. Replacement of genuine products: When replacing the pressure relief valve, it is recommended to choose original Atlas Copco spare parts or products from authorized official channels to ensure compatibility with the equipment and safety. Professional installation: The installation process should be carried out by professional technicians to ensure reliable valve connection and sealing, and to meet the pressure specification requirements of the equipment.

1617965500 Atlas Copco Installation Location: The filter element can be installed at any position in the compressed air system. It can be standardly equipped on the after-cooler and is highly flexible to use. It can effectively protect the compressed air system as well as components such as dryers and filters.

Installation requirements for replacement and maintenance instructions: This operation should be carried out by professional technicians to ensure that the installation of the gears in the axial and radial directions is accurate, and the meshing clearance complies with technical standards. Before installation, the mating surfaces should be cleaned, and any damage to the shaft diameter, keyways, etc. should be checked. If necessary, repairs should be made. Lubrication guarantee: After replacement, check if the lubrication path is unobstructed to ensure that the meshing part of the gears is adequately lubricated. After the first start-up, monitor the temperature and noise to ensure normal operation. Interlock check: After replacing the gears, it is recommended to simultaneously check the condition of the mating gears, bearings, and other related components to avoid premature damage to the new gears due to the wear of other components.