China 2901205100 Atlas Copco Manufacturer, Supplier, Factory

The air compressor oil separator is a crucial component in the air compressor system, used to separate oil droplets and oil mist from the compressed air. It ensures the purity of the compressed air and enables the recycling and reuse of the lubricating oil.

Maintenance Key Points for Worm Wheel Type Impellers in Atlas Copco Centrifugal Air Compressors Regular Inspection: Use endoscopes or shut down for disassembly to check if there are cracks, wear, deposits, or foreign object impact marks on the impeller surface. Special attention should be paid to the blade roots (stress concentration areas). Dynamic Balance Calibration: If the impeller shows slight deformation or wear after long-term operation, it may cause dynamic balance imbalance. Re-calibration is necessary to avoid excessive vibration of the shaft system. Replacement Standard: When the impeller has irreparable cracks, severe damage to the blades, or the dynamic balance cannot be adjusted to the qualified range, it is necessary to replace the original factory impeller in time to ensure the matching and operational safety of the unit.

Secure top-tier Atlas Copco Spare Parts Genuine Original 1613950300 1630040799 2903752501 3002600140 1616710390 1089962516 2901170100 to overhaul industrial Atlas Copco screw air compressors. ISO 9001 factory-certified original components eliminate aftermarket mismatch risks, pre-tested for seamless direct installation.

Atlas Copco 1630027906,Filtering and Purification Function: The air filter removes impurities from the air entering the air compressor to ensure the quality of the compressed air. The oil filter removes impurity particles from the lubricating oil to keep it clean and prevent metal particles, dust, etc. from entering the main unit. The oil-gas separator separates the lubricating oil from the compressed air to ensure the recycling of the lubricating oil and reduce the oil content in the compressed air. Lubrication Protection Function: The lubricating oil lubricates the internal parts of the air compressor, reducing friction and wear between parts and having good cooling performance. It forms a protective film on the surface of high-speed rotating components, preventing moisture and impurities from invading and protecting the internal parts from corrosion. System Protection Function: Prevent equipment damage by regularly replacing consumables to avoid overload and damage of the equipment due to clogged filter elements. Extend Service Life: By effective filtering and lubrication, significantly extend the service life of the air compressor main unit.

The oil filter (oil filter) of the Atlas Copco injection-type screw compressor is an indispensable core component in the lubrication system. Its main function is to filter impurities (such as metal debris, oil sludge, dust, etc.) from the lubricating oil, protecting the key moving parts like screw rotors, bearings, and gears, preventing increased wear, and maintaining the cleanliness and performance stability of the lubricating oil.

Atlas Copco 2901186500,Reducing gas temperature in multi-stage compression process, after the gas passes through the previous stage of compression, its temperature will rise sharply. The intercooler is located between the compression stages and can cool the high-temperature gas, providing lower-temperature and denser gas for the next stage of compression. Enhancing system efficiency The cooling process makes the compression process closer to isothermal compression, thereby reducing power consumption and improving the operational efficiency and economy of the entire compressor system. Separating condensate When the gas temperature drops, the water vapor and oil-gas mixture contained therein will condense. Some lubricating oil and water will condense into droplets, which can then be separated out, making the output compressed air cleaner. By effectively controlling the gas temperature, risks such as lubricant failure, equipment component damage, and even explosion caused by excessively high temperatures can be prevented. At the same time, the pollution risks to downstream equipment and pipelines can also be reduced.