China Screw Air Compressor Parts Manufacturer, Supplier, Factory

Atlas Copco 2906024100,When the high-pressure air compressor is running, the lubricating oil absorbs a large amount of heat generated during the compression process, causing the oil temperature to rise sharply. The ZT3 high-pressure oil cooler adopts a forced circulation cooling system, keeping the oil temperature within the range required by the equipment. This process effectively avoids problems such as reduced viscosity and weakened lubrication performance due to excessively high oil temperature. The ZT3 high-pressure oil cooler is specifically designed for high-pressure air compressors, and its cooling system can meet the circulation requirements of lubricating oil in high-pressure environments. At the same time, for the extreme working conditions that high-pressure air compressors may encounter, the ZT3 oil cooler is equipped with a complete electrical protection system to ensure the stability of the cooling process and prevent safety accidents caused by cooling system failures.

By using the original Atlas Copco filter kits or service kits, the failure rate of the equipment can be effectively reduced, its service life can be prolonged, and the quality of compressed air can be maintained. This is particularly suitable for industrial scenarios where high reliability of equipment is required.

Source authentic Atlas Copco Air Compressor Spare Parts Original Oil Filter Air Filter Pressure Sensor Solenoid Valve Filter Valve Service Kit with part codes 1621737890, 1630040999, 1089962512, 29011145300, 2901208033 for industrial screw air compressor upkeep. These ISO 9001 genuine original components pass full factory inspection, fit Atlas Copco compressors for direct replacement.

Maintenance and Common Issues of 40°C Thermostat for Atlas Copco Air Compressors Regular Calibration: After long-term use, temperature drift may occur. It is recommended to calibrate with a thermometer annually to ensure accurate triggering at 40°C. Cleaning and Maintenance: If the sensing part is covered with oil or dust, it will affect the sensitivity of temperature measurement. It is necessary to wipe it regularly (operate in power-off state). Common Faults: Temperature Trigger Deviation: This may be due to the aging of the sensing element. Replacement of the same model thermostat is required. Contact Adhesion: Causes the cooling equipment to run continuously or fail to start. Check the contact condition and replace it if necessary.

Why is lubricating oil used for the screw rod? 1.Reduce friction: The grease can form a lubricating film on the surface of the screw rod, reducing the friction coefficient and thereby minimizing wear and heat generation. 2.Preventing rust: The grease has certain anti-corrosion properties, which can prevent the screw rod from rusting due to oxidation or moisture. 3.Transmitting power: A certain oil film is formed between the screw rods, which helps to smoothly transmit power, reducing mechanical vibration and noise. 4.Sealing function: The grease performs the sealing function, preventing dust and moisture from entering the screw rod. 5.Anti-rust and anti-corrosion: Lubricating grease is an excellent anti-rust and anti-corrosion agent.

3002619020 ATLAS COPCO Air Compressor "Purification Tube Assembly" Replacement and Maintenance Recommendations Replacement Cycle: At least once a year; Replace when pressure drop exceeds preset value or indicator indicates; In some operating conditions, this can be shortened to 4,000 hours or less. Operation Points: Replace the entire unit or isolate and depressurize the part before replacement; Check the double O-rings and other seals during replacement; Do not clean the filter element; Only replace the original factory parts. Energy Savings Benefits: High-quality filter elements can reduce pressure drop and lower energy consumption; Ignoring the replacement will lead to a significant increase in energy consumption.