China Atlas Copco Service Kit Manufacturer, Supplier, Factory

Gear transmission of the air compressor body: For Atlas Copco G/GA and other oil-injected screw compressors, "high-performance gear drive" is commonly used. The motor drives the main unit through a gearbox for speed increase, which is a transmission structure rather than a "gear motor".

2901300407 FILTER KIT UD 140+ It combines the DD + and PD + two filtration steps into one, adopting a two-in-one filtration concept, reducing installation space and complexity, and is particularly suitable for use scenarios with limited space. 2901300407 FILTER KIT UD 140 + Excellent filtration effect: It can effectively reduce oil mist, wet dust and water droplets in the compressed air flow, ensuring the purity of the output air. It can achieve the same air purity as when two traditional filters are used in series.

Atlas Copco Z160-275 transmission shaft bearing kit usage and maintenance precautions: When replacing, it must be operated by professional technicians. Follow the steps in the equipment maintenance manual strictly to ensure that the bearings are installed properly and the clearance is adjusted reasonably. Before installation, clean the transmission shaft and bearing housing, and check whether the relevant mating surfaces are intact to avoid impurities or damage affecting the bearing lifespan. It is recommended to conduct regular inspections in combination with the overall maintenance cycle of the equipment. If abnormal bearing noise or abnormal temperature rise is detected, the kit should be replaced promptly.

The Atlas Copco adsorption air dryer uses two towers to alternate between adsorption and regeneration, enabling continuous supply of dry air. It is suitable for applications where a lower dew point is required.

Notes for Attention Regular inspection: The pressure relief valve should be subject to regular functional checks and calibrations to ensure it operates properly in case of abnormal pressure, preventing failure due to issues such as valve core jamming. Replacement of genuine products: When replacing the pressure relief valve, it is recommended to choose original Atlas Copco spare parts or products from authorized official channels to ensure compatibility with the equipment and safety. Professional installation: The installation process should be carried out by professional technicians to ensure reliable valve connection and sealing, and to meet the pressure specification requirements of the equipment.

Atlas Copco Air Compressor Oil Filter Housing Selection and Replacement Precautions Compatibility: It must match the filter element model, the interface size of the unit, and the working pressure to avoid filter failure due to excessive installation gap. Certification Requirements: Preferentially choose the housing from the original manufacturer or those that have passed pressure certification (such as ASME, CE) to ensure pressure safety. Installation Specifications: During assembly, the sealing surfaces need to be cleaned, and a small amount of lubricating oil should be applied to the O-ring to avoid cracking of the housing due to overly tight screws. Although the Atlas Copco air compressor oil filter housing is an auxiliary component, its reliability directly affects the stability of the filtration system. Regularly checking the sealing performance and structural integrity of the housing is an important step in preventing oil contamination.