China VCU Service Kit Manufacturer, Supplier, Factory

Faults and Replacement Suggestions: Common Faults and Handling: Winding Burnout: Usually caused by abnormal voltage or long-term overloading, manifested as the electromagnetic valve not moving. It is recommended to replace the entire electromagnetic valve (including the winding); Valve Core Stuck: Caused by impurities or oil contamination, preventing the valve from fully opening or closing, which may lead to abnormal pressure or poor drainage. It is necessary to replace the original part; Leakage: Caused by aging of the sealing components, it is necessary to replace in time to avoid loss of compressed air or engine oil. When replacing, please note: Power off operation, confirm that the voltage specification is consistent, and when installing, the sealing component should be coated with a small amount of engine oil to enhance the sealing performance.

Recommendation for Purchasing Air Filters for Atlas Copco Industrial Air Compressors The air filter is the "first line of defense" for the air compressor, and its quality directly affects the equipment's lifespan and operating costs. It is recommended to purchase original factory air filters from our authorized dealers of Atlas Copco. The filtering accuracy, dust capacity and compatibility of the original factory parts have been rigorously tested, and they can maximize the protective effect. Poor-quality air filters may seem to have a lower cost, but due to poor filtering performance, the main unit may wear out prematurely, thereby increasing maintenance costs. Regular maintenance and timely replacement of air filters is one of the most fundamental and important steps in the daily maintenance of the air compressor.

Replacement and Maintenance Key Points Replacement Cycle: 4000 - 6000 hours or replace as needed annually; for high dust / high humidity or heavy load conditions, it can be shortened to 3500 - 4000 hours. Installation and Sealing: Install according to the manual torque, replace all O-rings, avoid unfiltered air or oil bypass. Pressure Difference Monitoring: Pay attention to the oil pressure difference and fuel consumption, if it abnormally increases, stop the machine for inspection and replacement. Companion Replacement: It is recommended to replace simultaneously with air filter, oil filter, and lubricating oil to reduce the oil pressure difference and energy consumption.

Purchase Recommendation The 55℃ temperature control valve is a specific parameter component. It is recommended to purchase it through our authorized dealers, providing the specific model of the air compressor (such as G55, GA55, etc.) and the original valve part number to ensure the acquisition of matching original factory parts. Non-original factory valves may have temperature setting deviations or compatibility issues, affecting the temperature control accuracy and equipment safety. Although this valve is not common, it is crucial for ensuring the stable operation of the air compressor under specific conditions. Attention should be paid to maintenance and the accuracy of the parts.

The GA+ series compressors have excellent energy efficiency. These compressors, designed to reduce power consumption, can help factories lower their energy costs. The intelligent control system not only optimizes the performance of the compressors but also enhances energy efficiency and helps factories reduce their environmental impact.

The high-pressure rotor replacement kit of Atlas Copco is mainly applicable to equipment such as high-pressure compressors of the Atlas Copco brand. When the high-pressure rotor of the equipment is worn out, damaged or reaches a certain service life, which affects the normal operation and compression efficiency of the equipment, this kit can be replaced to restore the performance of the equipment.