China Original 1621324500 Manufacturer, Supplier, Factory

Atlas Copco Ventilation Pipe Component Application and Maintenance Recommendations Application Scenario: Primarily used for the ventilation system setup in air compressor rooms, especially in enclosed or poorly ventilated environments, where the use of ventilation pipe components is necessary to optimize air circulation and maintain the room temperature within the equipment's allowable range (generally recommended not to exceed 40℃). Maintenance Points: Regularly inspect the ventilation pipes for any damage, deformation, or loose connections to ensure there is no air leakage; Clean the dust accumulation in the pipes to prevent blockages that affect air volume; For flexible connection pipes, check for aging, cracking, and replace them in a timely manner to ensure their elasticity and sealing performance.

If you need to purchase or confirm the specific model, it is recommended to provide the equipment serial number of ZT55-90. Refer to the corresponding part number in the official Atlas Copco spare parts manual (usually a series of numbers, such as 1092xxx series), and obtain precise spare parts from the authorized service provider to ensure the stable operation and compliance of the equipment.

ATLAS COPCO's FILTER KIT DD/DDP 130 + Usage and Maintenance Tips: The filter element should be replaced regularly based on the operating time of the equipment or the monitoring results of the compressed air quality. It is generally recommended to follow the maintenance cycle recommended by ATLAS COPCO to avoid affecting the efficiency of the dryer or causing excessive pressure drop due to clogged filter elements. The replacement process requires closing the relevant air path and releasing the pressure. The operation should comply with safety regulations. It is recommended to be carried out by professionals in accordance with the equipment manual to ensure correct installation.

Atlas Copco Operating Instructions The 40°C setting value for Atlas Copco is an optimized parameter specific to certain models or working conditions. It cannot be adjusted at will. Otherwise, it may affect the temperature control accuracy, leading to reduced equipment operation efficiency or component damage. When replacing parts, choose Atlas Copco original accessories to ensure they match the temperature control logic and interface of the equipment. Avoid system failures caused by compatibility issues. For specific model compatibility or more detailed technical parameters, it is recommended to refer to the equipment manual or contact the Atlas Copco authorized service center for confirmation.

If the muffler is clogged or damaged, it will cause an increase in intake/exhaust resistance, which may affect the gas production efficiency of the air compressor. Regular inspection and maintenance are necessary. For large air compressor systems, it is recommended to adopt comprehensive noise reduction measures such as soundproof rooms and vibration isolators for better results.Well-known brands (such as Atlas Copco, Ingersoll Rand, etc.) all have corresponding air compressor mufflers. Depending on the specific model, original factory parts or third-party products that meet the specifications can be selected.

The high-pressure rotor replacement kit of Atlas Copco is mainly applicable to equipment such as high-pressure compressors of the Atlas Copco brand. When the high-pressure rotor of the equipment is worn out, damaged or reaches a certain service life, which affects the normal operation and compression efficiency of the equipment, this kit can be replaced to restore the performance of the equipment.