China Oil Level Gauge Manufacturer, Supplier, Factory

If you need to purchase or confirm the specific compatible model, it is recommended to provide the complete model number of the compressor (such as GA22, GA37, etc.), and refer to the corresponding number in the official Atlas Copco spare parts catalogue to ensure complete compatibility of the kit with the equipment. Regular replacement of the original filter kit is an important maintenance measure for maintaining the performance of the compressor and extending its service life.

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.

Atlas Copco 2205177596 is designed for different equipment series. It features both elastic coupler and rigid coupler types, using high-strength material elastic rubber. This product is suitable for the high-load and continuous operation requirements of industrial environments.

Maintenance and replacement precautions for the pressure valves of Atlas Copco industrial air compressors: Regularly check the sealing performance and adjustment accuracy of the pressure valves. If there are problems such as excessive pressure fluctuations, leakage, or inability to relieve pressure, timely maintenance is required. When replacing, use original Atlas Copco parts to ensure compatibility with the compressor model and avoid system failures due to parameter mismatch. Maintenance or adjustment should be carried out by professional technicians. Follow the equipment manual specifications strictly to prevent safety risks caused by incorrect pressure settings.

Atlas Copco 1631090801 Pipe G 1/4X245, G1/4 interface size, G represents imperial non-threaded sealed pipe thread, the thread size is 1/4 inch, 245 represents the pipe length.

When purchasing, it is recommended to provide the specific model information of the air compressor through our Atlas Copco distributors to obtain the matching genuine carbon seals, ensuring compatibility with the equipment and guaranteeing the sealing effect. During installation and replacement, it is also necessary to be operated by professional technicians to achieve the best sealing performance.