China O-Ring Manufacturer, Supplier, Factory

2901990117 GHS 5800 VSD+ FIlter Kit Atlas Copco China manufacture.If you are searching for 2901990117 GHS 5800 VSD+ FIlter Kit Atlas Copco Atlas Copco Air Filter Element China Local Price , the blow is specifical data for you cross-checking.
Product name: Air Filter
Part Number:2901990117; 2901-9901-17; 2901 9901 17
Brand: Atlas Copco
Quality Level: Genuine Original
Atlas Copco Leading Delivery Time: 3-7 working days (if there is stock)
Price: Negotiable, and discounted prices are upon instant inquiry.

2906066100 Atlas Copco's metal oil pump component service kit replacement and maintenance recommendations for the ZR/ZL 55-90 series screw air compressors When there are abnormal oil pump noises, fluctuating supply pressure, insufficient lubricating oil flow, or oil leakage in the oil circuit, it is recommended to check the oil pump status and use this service kit for maintenance. During the replacement process, strictly follow the procedures in the equipment manual to operate and ensure the correct installation of the components, and conduct a pressure test after the repair to confirm that the performance of the oil pump has returned to normal.

Atlas Copco The air compressor water separator (also known as a compressed air dryer or water vapor separator) is a key device in the compressed air system used to remove and separate moisture and condensate in the compressed air. Its core function is to remove the water vapor generated during the compression process, preventing moisture from entering downstream equipment (such as pneumatic tools, pipelines, instruments, etc.) and causing corrosion, blockage or performance degradation.

By using the original Atlas Copco filter kits or service kits, the failure rate of the equipment can be effectively reduced, its service life can be prolonged, and the quality of compressed air can be maintained. This is particularly suitable for industrial scenarios where high reliability of equipment is required.

Working Principle Torque Transmission: The torque output by the motor is transmitted through the outer teeth of the coupling, and then via the inner teeth of the intermediate sleeve to the compressor shaft, achieving power transmission. Flexible Compensation: Axial Offset: The axial clearance between the inner and outer teeth allows for a small amount of axial displacement of the two shafts (typically ±0.5 to ±3mm). Radial Offset: The top of the outer teeth is made into a spherical shape (with the center of the sphere on the axis), allowing for a certain angular deviation between the two shafts (typically ≤1°). Angular Offset: Through the sliding and rolling of the tooth surfaces, the angular errors between the two shafts are compensated. Buffering and Vibration Reduction: The lubricating oil fills between the teeth and can absorb some vibration and impact loads, reducing equipment noise.

Order will be placed on standard delivery conditions. After the order is placed, an order acknowledgement and tracking information will be provided to you by email.