China Atlas Copco THERMOSTAT Manufacturer, Supplier, Factory

Atlas Copco 1901064370，The Atlas Copco intake valve controls the intake volume by adjusting the opening degree of the intake port according to the pressure changes in the storage tank, achieving loading and unloading control, and protecting the function to prevent a large amount of gas from entering the compressor head when it starts, reducing the starting current of the motor, and operating in a regular pattern of being loaded when powered and unloaded when power is lost. It has a capacity adjustment control function. Minimum pressure valve pressure establishment: When the equipment starts, it quickly establishes the circulating pressure required for lubrication, and the buffer protection control through the gas flow rate of the oil-gas separation filter to prevent high-speed gas flow from damaging the separation effect. Check valve function: Prevents the gas in the storage tank from flowing back to the oil-gas tank. Safety valve overpressure protection: Automatically opens when the system pressure exceeds the specified value, discharging the gas into the atmosphere. Safety device: Prevents pressure equipment and containers from bursting due to excessive pressure, and automatically controls: Automatically closes when the pressure drops to the specified value, ensuring the safe operation of the equipment. Temperature control valve temperature regulation: Controls the proportion of lubricating oil entering the oil cooler according to the principle of thermal expansion and contraction. Temperature protection ensures that the rotor temperature is within the set range, preventing excessive or insufficient temperature. When the refrigeration machine starts, it forces the lubricating oil to enter the compressor head directly without passing through the cooler, achieving rapid heating. Electromagnetic valve control system has two types of medium regulation for loading and venting: used to adjust the bias, flow rate, speed, on-off parameters and precisely control the connection and disconnection of the oil-gas tank to the intake valve through the cylinder pipeline under PLC instructions.

Atlas Copco V-BELT (SET 2X) XPZ Maintenance Points: During installation, ensure the appropriate tension is maintained. Insufficient tension will cause the belt to slip, affecting the transmission efficiency. Excessive tension will increase the load on the bearings, shortening the lifespan of the belt and the bearings. During use, regularly check the wear condition of the belt. If cracks are found on the surface of the belt, severe wear, or slipping occurs, it is necessary to replace it promptly. At the same time, keep the belt clean to avoid the attachment of oil stains, dust and other impurities on the belt, which will affect its transmission performance.

Atlas Copco Z160-275 transmission shaft bearing kit usage and maintenance precautions: When replacing, it must be operated by professional technicians. Follow the steps in the equipment maintenance manual strictly to ensure that the bearings are installed properly and the clearance is adjusted reasonably. Before installation, clean the transmission shaft and bearing housing, and check whether the relevant mating surfaces are intact to avoid impurities or damage affecting the bearing lifespan. It is recommended to conduct regular inspections in combination with the overall maintenance cycle of the equipment. If abnormal bearing noise or abnormal temperature rise is detected, the kit should be replaced promptly.

Atlas Copco 1420050839,The O-ring is a seemingly insignificant yet crucial sealing component. It fills the gaps between components through elastic deformation and is responsible for ensuring the efficient sealing of liquid and gas media by the air compressor. They are suitable for secondary static and dynamic uses. The O-ring can be sealed radially or axially as a whole. The sealing is achieved during assembly through axial or radial movement within the air compressor. Although the O-ring is small, it is the key to ensuring the sealing performance, efficiency, and lifespan of the equipment. Correct selection, proper installation, and meticulous maintenance are crucial.

Common Faults and Maintenance of 1635630500 Electromagnetic Valves in Atlas Copco Air Compressors Common faults of electromagnetic valves include coil burnout , valve core sticking , and aging of sealing components. During daily maintenance, the following points should be noted:Regularly check if the connection terminals are loose to avoid poor contact;Keep the valve body clean to prevent impurities from entering the valve core;When there is abnormal operation, it is recommended to replace the original electromagnetic valve to ensure performance compatibility. When replacing, pay attention to the consistency of voltage specifications and interface dimensions.

Atlas Copco is a world-leading industrial equipment manufacturer, with a century-long history and profound technical expertise in the field of air compressors. As a benchmark enterprise in the compressor industry, its products are renowned for their efficiency, reliability and innovation, and are widely used in various sectors such as manufacturing, energy, healthcare, and construction.