China Atlas Copco THERMOSTAT 40°C Manufacturer, Supplier, Factory

Attention for the oil separation filter of Atlas Copco screw air compressor Part compatibility: The original Atlas Copco oil separation core must be used. It features efficient fiberglass or multi-layer filter materials, offering higher separation efficiency and matching the oil and gas tank in size, thus avoiding poor separation effect, excessive pressure difference or equipment damage caused by non-original products. Avoid contamination: During installation, do not touch the internal filter material of the oil separation core to prevent impurities from entering and affecting the filtering effect. Related maintenance: When replacing the oil separation core, it is recommended to also replace the lubricating oil and oil filter to ensure the overall cleanliness of the lubrication system.

Atlas Copco 2906062400,The main oil pump in the oil pump kit is responsible for delivering lubricating oil to all moving parts of the air compressor, forming an oil film to reduce friction and wear, and ensuring the efficient and stable operation of the equipment. The oil filter is integrated within the oil pump kit and is used to intercept and remove impurities from the lubricating oil, preventing particles from damaging the mechanical components and maintaining the cleanliness of the oil. The oil pump kit usually comes with an oil cooler to regulate the oil temperature and prevent the decline in lubrication performance due to high temperatures. At the same time, an electric heater heats the oil in low-temperature environments to ensure the normal startup of the oil pump. The auxiliary oil pump serves as a backup system and automatically starts when the pressure of the main oil pump is insufficient, ensuring adequate lubrication before the air compressor starts. Additionally, the oil pump kit optimizes the oil supply process through a linkage control mechanism to enhance overall reliability.

Atlas Copco 2901063300,The screw air compressor has an automatic drainage valve, whose function is quite clear - it is to drain the condensate water from the air compressor system in Dongguan and prevent it from remaining in the compression system. Regular maintenance of the drainage system also requires routine maintenance, including cleaning, replacing damaged parts, etc., to ensure the normal operation and drainage effect of the drainage system. ## IV. Common Problems and Solutions ### 1. Leakage of the Drainage Valve If the drainage valve has leakage, it should be immediately shut down for maintenance to eliminate the cause of the leakage. It could be that the valve core seal is damaged, or the valve is not closed tightly.

Atlas Copco 0663716702,The sealing function is bidirectional. As a bidirectional sealing element, the initial compression amount during installation in the radial or axial direction determines the initial sealing capacity. The force generated by the system pressure acting on the O-ring is the total sealing force, and this sealing force increases as the system pressure rises. The leak-free sealing can achieve absolute leak-free sealing as long as the O-ring has an initial pressure. Buffering and shock absorption. By utilizing the elasticity of rubber to absorb mechanical vibrations or impacts, the rigidity collision between components is reduced. It buffers the vibration during engine operation and avoids interface loosening. System protection prevents dust, particles, water or corrosive substances from entering the equipment interior, protecting precision components. It plays a waterproof sealing role in electronic equipment and prevents rainwater or moisture from invading the circuit board.

The oil filter element of Atlas Copco air compressors (Common Problems and Failure Causes) The filter element gets clogged prematurely Reasons: Excessive environmental dust (unfiltered intake air), excessive oil addition or mixing of different brand oils leading to emulsification, increased internal wear . Treatment: Improve environmental cleanliness, standardize oil usage, inspect worn components. Poor filtering effect Reasons: Using inferior filter elements , seal ring not properly aligned during installation , bypass valve always open. Treatment: Select original factory or high-quality aftermarket filter elements, ensure proper installation sealing, regularly check bypass valve function. Filter element rupture Reasons: Installation too tight, abnormal system pressure increase, insufficient strength of filter element material. Treatment: Standardize installation torque, check oil pressure control system, replace with qualified filter element.

Atlas Copco 1630027906,Filtering and Purification Function: The air filter removes impurities from the air entering the air compressor to ensure the quality of the compressed air. The oil filter removes impurity particles from the lubricating oil to keep it clean and prevent metal particles, dust, etc. from entering the main unit. The oil-gas separator separates the lubricating oil from the compressed air to ensure the recycling of the lubricating oil and reduce the oil content in the compressed air. Lubrication Protection Function: The lubricating oil lubricates the internal parts of the air compressor, reducing friction and wear between parts and having good cooling performance. It forms a protective film on the surface of high-speed rotating components, preventing moisture and impurities from invading and protecting the internal parts from corrosion. System Protection Function: Prevent equipment damage by regularly replacing consumables to avoid overload and damage of the equipment due to clogged filter elements. Extend Service Life: By effective filtering and lubrication, significantly extend the service life of the air compressor main unit.