China Atlas Copco OSE KIT Manufacturer, Supplier, Factory

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

Atlas Copco Maintenance and Replacement: Regularly inspect the wear, deformation or aging of the special-shaped rings . Replace them immediately if any abnormalities are found. When replacing, it is necessary to use the original or the same specification special-shaped rings. Standard rings cannot be used as substitutes . During the disassembly and installation process, avoid hitting the weak parts of the special-shaped rings, to prevent deformation and damage. Although the special-shaped rings of the air compressor are not universal, they play an irreplaceable role in special structural parts. Their design and manufacturing need to strictly match the specific requirements of the equipment, and special attention should be paid to precision and directionality during installation and maintenance to ensure the coordinated operation of all complex components of the air compressor.

The Atlas Copco filter kit UD15 + requires attention during use: The filter element should be replaced regularly according to the actual operating conditions of the compressed air (such as flow rate, contamination level, etc.) to ensure the filtration efficiency. The installation and replacement process should follow the Atlas Copco operation manual to ensure the correct matching of equipment models and avoid affecting the filtration effect or damaging the equipment due to improper installation.

Atlas Copco Air compressor Roller Bearing Main Types and Application Scenarios Spherical roller bearings Applicable to: Rotating components such as motor rotors and fan shafts that mainly bear radial loads. Features: Simple structure, low friction coefficient, capable of simultaneously bearing certain radial and axial loads, and allowing higher rotational speeds. Cylindrical roller bearings Applicable to: Parts that bear large radial loads, such as crankshafts. Features: Strong radial load-bearing capacity, large contact area between the rolling elements and the raceways, suitable for high-load conditions, but not suitable for bearing axial loads. Angular contact ball bearings

The centrifugal cooling fan feature of Atlas Copco air compressor GA55: It adopts a low-speed centrifugal fan design, featuring high cooling air volume and low noise. The fan energy-saving cycle controls the fan's start/stop by monitoring the outlet temperature of the main unit and the ambient temperature. This not only saves energy but also prevents condensation water from forming in the GA VSD compressor when operating at low loads.PRICE INQUIRY

Maintenance Reminder: Check the valve core for any jamming (disassemble for cleaning) and the springs for fatigue every 6 to 12 months. Replace the aging seals in a timely manner. If the pressure rebounds too quickly after depressurization or cannot be completely relieved, investigate whether the valve core seal has failed or if the control signal is normal.