China 2901205500 Manufacturer, Supplier, Factory

Atlas Copco 0634100085，The coupling transmits the motor torque stably to the compressor rotor, ensuring the normal operation of the air compressor. This is its most fundamental function, applicable to high-power and high-speed scenarios. Overload protection: In case of abnormality in the motor or rotor, the coupling can quickly disconnect the connection to prevent equipment damage. Buffering and shock absorption: Absorbing vibrations and shocks caused by startup, shutdown or load changes, reducing equipment wear. Offset compensation It can compensate for axial, radial and angular offsets caused by manufacturing and installation errors, thermal expansion or deformation, ensuring the alignment accuracy of the shaft. Adaptability to complex working conditions High load/High speed: Suitable for high-torque and high-speed environments, ensuring the stability of the transmission system. Safe and reliable: Some couplings are designed with safety devices, automatically disconnecting the connection when the load exceeds the limit.

Maintenance tips for Atlas Copco air compressor thermostat kit: Regularly remove the thermostat valve for cleaning, remove foreign substances that may exist in the lubricating oil, and prevent blockage. You can put the valve core in 80℃ water to observe. If the valve core expands fully in this environment and is 10-15mm longer than at normal temperature, then the valve core is normal. If there are aging or other issues, the thermostat valve needs to be replaced.

First separation: The oil-containing gas mixture, which contains various-sized oil droplets, exiting from the exhaust port of the air compressor main unit, enters the oil-gas tank. Most of the oil in the oil-gas mixture falls to the bottom of the tank under the action of centrifugal force and gravity. Second separation: The compressed air containing oil mist passes through the micrometer and fiberglass filter material layers of the oil-gas separation filter element for secondary separation. The oil particles, through the diffusion effect of the filter material, direct interception, and inertial collision and aggregation mechanisms, quickly aggregate into large oil droplets. Under the action of gravity, the oil gathers at the bottom of the oil separation element and returns to the main lubricating oil system through the bottom concave area of the secondary return oil pipe inlet, thereby making the air compressor discharge purer and oil-free compressed air.

BY REPLACING THE OIL FILTER ON YOUR COMPRESSOR, YOU PREVENT AN ARRAY OF SHORT AND LONG TERM PROBLEMS, AS WELL AS SAVES YOU DOWN-TIME AND REPAIR COSTS LATER ON.THIS OIL FILTER MEETS OR EXCEEDS OEM SPECIFICATIONS.

Atlas Copco V-BELT (SET 2X) XPZ Maintenance Points: During installation, ensure the appropriate tension is maintained. Insufficient tension will cause the belt to slip, affecting the transmission efficiency. Excessive tension will increase the load on the bearings, shortening the lifespan of the belt and the bearings. During use, regularly check the wear condition of the belt. If cracks are found on the surface of the belt, severe wear, or slipping occurs, it is necessary to replace it promptly. At the same time, keep the belt clean to avoid the attachment of oil stains, dust and other impurities on the belt, which will affect its transmission performance.

Atlas Copco 2902022207,The functions of the Atlas Copco air compressor exchange unit: The core function is heat recovery and system optimization. The main role of the air compressor exchange unit is to recover the waste heat generated during the operation of the air compressors and transfer this heat to the cold water through heat exchange, heating it to 50-80℃, which is then used for domestic hot water, process hot water or residual heat cooling in enterprises, achieving "zero-cost" hot water supply and reducing the enterprise's reliance on mineral energy. The auxiliary function is to ensure the stable operation of the air compressor. By recovering the waste heat, it can effectively lower the internal temperature of the air compressor, reduce the impact of high temperatures on the equipment, and extend the service life of the air compressor; at the same time, it reduces the frequency of high-temperature alarms of the air compressor, reduces the operating time of fans and other cooling systems, and saves energy loss.