China Original 1621737800 Manufacturer, Supplier, Factory

Features: The Atlas air compressor gear set features high precision, high reliability, and low noise, ensuring the stable operation and high performance of the air compressor.

Replacement and Maintenance Precautions Cycle Compliance: Follow the specified cycle in the equipment manual for replacement (e.g., air filter every 2000 - 4000 hours, oil-gas separator every 8000 - 12000 hours). In harsh environments (dusty, high temperature), check and replace in advance. Installation Specifications: Release system pressure before replacement and clean the interior of the filter housing. The sealing parts of the new filter need to be coated with clean lubricating oil (for oil filter) or compressed air (for air filter) to ensure a reliable seal. Tighten the end cover or housing with the specified torque to avoid over-tightening which may damage the shell or under-tightening which may lead to leakage. Kit Integrity: The original factory kit includes all necessary components (such as sealing parts, small gaskets), and when replacing, all components must be updated. Do not mix and use old parts.

1. Daily maintenance and cleaning Daily drainage: The compressor will produce moisture during operation. To avoid pipeline blockage, we recommend draining the moisture once a day to ensure smooth system flow.

Atlas Copco J-520 solenoid valve is a specialized solenoid valve designed by Atlas Copco for its specific model compressors or industrial equipment. It is mainly used to control the on-off of fluids (such as gases and liquids), playing a crucial role in the pneumatic or hydraulic systems of the equipment in terms of automatic control.

Atlas Copco 1089057567 PRESSURE TRANSDUCER. When replacing, select a model that matches the original factory specifications to ensure consistency in range, signal type and installation dimensions. Before installation, clean the interface to prevent impurities from entering. When wiring, pay attention to polarity to avoid damaging the sensor or the control system.

Basic working principle A three-phase induction motor generates a rotating magnetic field by connecting to three-phase alternating current and passing it through the stator windings. The rotor cuts the magnetic lines of force in the magnetic field, generating an induced current, which is then subjected to electromagnetic force and rotates in accordance with the magnetic field (the rotational speed is slightly lower than that of the rotating magnetic field, and there is a slip rate). The electrical energy is converted into mechanical energy to drive the compression mechanism of the air compressor (such as pistons, screws, etc.) to operate. Adaptation features