China Atlas Copco Hose Assembly Manufacturer, Supplier, Factory

Key structural design Air intake: Gradually expanding or tangential design, reduces flow velocity and separates large particle impurities. Filter element installation: Vertical or horizontal installation, facilitating replacement and maintenance. Drainage structure: Gravity drainage port or automatic drainage valve, prevents condensate water from soaking the filter element. Sealing design: Uses nitrile rubber or fluorine rubber sealing rings, with compression ratio of 15% to 25%. Quick disassembly structure: Snap-fit or bolt connection, simplifies maintenance procedures.

Atlas Copco confirms the type of lubricating grease Based on the type of air compressor components and operating conditions , select the matching special lubricating grease . It is strictly prohibited to mix different types or grades of lubricating grease . Check the parameters of the lubricating grease: such as applicable temperature range, pour point , and penetration . Atlas Copco cleans the components to be lubricated Stop the machine and ensure the components are completely cooled. Use oil-free cotton cloth or dedicated cleaning agents to wipe the old lubricating grease, oil stains, dust, and metal debris on the surface of the components, especially the key areas such as the bearing seat and the meshing surface of the gears, which need thorough cleaning .

1089058022 During the maintenance of the air compressor, Atlas Copco disassembles and cleans the unloaders, removes internal oil deposits and impurities, and checks the wear condition of the valve cores. Replace the worn-out sealing rings, gaskets, etc., to ensure the sealing performance. The multimeter is used to measure the resistance of the coil to determine if it is functioning properly, thus preventing control failure due to electrical faults.

First separation: The oil-gas mixture containing various-sized oil droplets, which comes out from the exhaust port of the air compressor main unit, enters the oil-gas tank. Most of the oil in the oil-gas mixture falls to the bottom of the tank under the action of centrifugal force and gravity. Second separation: The compressed air containing oil mist passes through the micrometer and fiberglass filter material layers of the oil-gas separation filter element for secondary separation. The oil particles undergo mechanisms such as diffusion, direct interception, and inertial collision aggregation, causing the suspended oil particles in the compressed air to quickly coalesce into large oil droplets. Under the action of gravity, the oil gathers at the bottom of the oil separation element and returns to the main lubricating oil system through the bottom concave area of the secondary return oil pipe inlet, thereby enabling the air compressor to discharge more pure and oil-free compressed air.

Atlas Copco Screw Compressor Minimum Pressure Valve Assembly Original Model Selection and Notes It is necessary to select the corresponding specification of the minimum pressure valve assembly according to the compressor model (such as GA75, G110). Original factory parts (such as 1622 series, 0300 series numbers) can ensure that the pressure setting value, flow parameters, and the unit are completely matched. Non-original factory parts may cause unstable performance due to insufficient structural accuracy, and even lead to serious problems such as poor lubrication and failure of oil-gas separation. It is recommended to prioritize the use of original factory components.

Purchase and Maintenance Suggestions: Purchase Channel: Preferentially purchase through the official website of Atlas Copco or from our authorized certified service providers to ensure the authenticity of the parts and warranty; Installation and Maintenance: During installation, pay attention to the matching of interface sizes. Regularly clean the valve body to prevent impurities from blocking; If there is abnormal drainage (such as inability to open or close tightly), it is recommended to replace the original factory parts in time to avoid affecting the system operation.