China Atlas Copco 2901091900 Manufacturer, Supplier, Factory

Atlas Copco Common Problems and Risks Oil emulsification: This often occurs due to the failure to promptly drain condensate (such as when the drain valve of the oil separator is blocked). Regular drainage is necessary. After emulsification, the oil must be replaced immediately and the drainage system checked. Oil carbonization: Due to poor oxidation stability of the oil or excessive exhaust temperature (failure of the cooling system), carbon deposits will clog the core of the oil separator and the oil filter, resulting in increased pressure loss and increased energy consumption. In severe cases, it can cause the main unit to freeze. Abnormal oil level: Low oil level will lead to insufficient lubrication and cooling; high oil level will cause excessive oil content in the exhaust (the oil separator does not separate thoroughly), and oil needs to be added or drained according to the scale on the oil level gauge.

By using this service package for regular maintenance and inspection, problems such as wear and leakage of the intake valve can be promptly detected and resolved. This helps prevent situations where compressor efficiency decreases, energy consumption increases, or even the compressor stops due to intake valve failure. It is suitable for various industrial production scenarios that rely on Atlas Copco compressors, helping enterprises reduce equipment maintenance costs and ensuring the continuity of production.

Atlas Copco G11FF is a small fixed-type oil-injected screw air compressor under the Atlas Copco brand. It is specifically designed for small and medium-sized industrial settings, featuring a compact structure, high efficiency, and reliability. It is widely used in scenarios such as pneumatic tool driving in workshops, small production lines, and laboratories where there is a moderate demand for compressed air.

Maintenance and Replacement Precautions Fault Diagnosis: If the air compressor shows abnormal oil temperature (either too high or too low), or if the cooling system load is abnormal, it may be caused by the jamming of the constant temperature valve, the failure of the temperature sensing element, or poor valve core sealing. Such issues should be promptly checked. Model Matching: The constant temperature valves of different models of air compressors have differences in interface size, set temperature, and flow parameters. It is necessary to select the original factory-compatible model to avoid affecting the temperature control accuracy due to incompatible specifications.

Maintenance suggestions for the sliding sealing components of Atlas Copco air compressors: Regularly inspect the wear condition of the sealing parts (such as the opening gap of the piston ring, the leakage volume of the piston rod seal); Atlas Copco Ensure the normal operation of the lubrication system (oil mist lubrication or solid lubricant in no-oil conditions); Atlas Copco Filter the intake air (reduce dust and other impurities); When replacing the sealing parts, select the model and material that match the working conditions and ensure the installation accuracy.

Procurement and Adaptation When procuring, the model of the compressor (such as GA30, GX7), component serial number or installation location (such as the bottom of the oil-gas separator, the drain port of the gas storage tank) should be provided. Obtain the adapted components through the official authorized channels to avoid functional failure due to size or material mismatch. The stable operation of the spherical float valve is crucial for the medium separation efficiency of the air compressor and the safety of the system. Regular maintenance and timely replacement can effectively reduce equipment failures and problems with the quality of compressed air.