China 2901091900 Manufacturer, Supplier, Factory

Purchase and Maintenance Suggestions: Purchase Channel: Preferentially purchase through the official website of Atlas Copco or from our authorized certified service providers to ensure the authenticity of the parts and warranty; Installation and Maintenance: During installation, pay attention to the matching of interface sizes. Regularly clean the valve body to prevent impurities from blocking; If there is abnormal drainage (such as inability to open or close tightly), it is recommended to replace the original factory parts in time to avoid affecting the system operation.

Atlas Copco G11FF is a small fixed-type oil-injected screw air compressor under the Atlas Copco brand. It is specifically designed for small and medium-sized industrial settings, featuring a compact structure, high efficiency, and reliability. It is widely used in scenarios such as pneumatic tool driving in workshops, small production lines, and laboratories where there is a moderate demand for compressed air.

All these filter components must be equipped with original Atlas Copco parts to ensure filtration efficiency and equipment compatibility. During maintenance, it is necessary to check and replace them according to the specified cycle in the equipment manual to avoid equipment failure due to filter failure.

Replacement and Maintenance Precautions Cycle Compliance: Follow the specified cycle in the equipment manual for replacement (e.g., air filter every 2000 - 4000 hours, oil-gas separator every 8000 - 12000 hours). In harsh environments (dusty, high temperature), check and replace in advance. Installation Specifications: Release system pressure before replacement and clean the interior of the filter housing. The sealing parts of the new filter need to be coated with clean lubricating oil (for oil filter) or compressed air (for air filter) to ensure a reliable seal. Tighten the end cover or housing with the specified torque to avoid over-tightening which may damage the shell or under-tightening which may lead to leakage. Kit Integrity: The original factory kit includes all necessary components (such as sealing parts, small gaskets), and when replacing, all components must be updated. Do not mix and use old parts.

Atlas Copco Air Compressor Intake Valve Maintenance Kit Compatibility and Selection The intake valve structures of different series of air compressors (such as GA37, GA75, ZT55, etc.) are different. The maintenance kit needs to be strictly matched with the model of the air compressor. Usually, the model of the air compressor or the part number of the intake valve is used as the selection basis (such as the 1622 series intake valve maintenance kit for the GA series). It is recommended to select the corresponding kit based on the specific model of the air compressor, the production year, and the model of the intake valve (you can query it in the equipment manual or on the valve body label). Avoid mismatch in size or components.

Correlation check: Verify that the cooler and the lubrication system are unobstructed to prevent premature damage to the temperature control kit due to blockage by other components. After replacement, it is recommended to shorten the initial oil change interval to ensure system cleanliness. The normal operation of the constant temperature kit directly affects the lubrication effect and lifespan of the air compressor. When replacing it, strictly follow the technical manual of the corresponding model.