China Atlas Copco 1604530702 Manufacturer, Supplier, Factory

Atlas Copco Air compressor Roller Bearing The rolling bearings of the air compressor are the key components that support rotating parts (such as crankshafts, rotors, motor shafts, etc.). Their main function is to reduce the frictional resistance during rotation, and they also bear radial and axial loads to ensure the efficient and stable operation of the equipment.

As the professional manufacturer, we would like to provide you 1630060451 Atlas Copco Fan Radial. Fan Assembly Parts Numbers are for your references because Atlas Copco may have updated new part numbers. Please specify the designated part numbers and compressors name models, we will reconfirm to you for the identical item.  If you are bored with Alibaba middle handlers, feel worry free to deal with our company now. Shoot the inquiry button here.

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.

Atlas Copco 2906013000,By conducting heat exchange, the heat generated inside the air compressor is transferred to the cooling medium (such as water or air), effectively reducing the temperature of the lubricating oil. High temperatures can cause problems such as the softening of the lubricating oil and the deformation of bearings. The oil cooler continuously cools down to prevent key components like bearings from being damaged due to overheating, ensuring the normal operation of the air compressor. An appropriate oil temperature helps improve the overall efficiency of the air compressor. Overheating leads to a decline in performance, while the oil cooler ensures that the lubricating oil circulates at the optimal temperature, maintaining the stable output of the compressor. By reducing wear and failures caused by high temperatures, the oil cooler significantly extends the lifespan of the air compressor.

All these filter components must be equipped with original Atlas Copco parts to ensure filtration efficiency and equipment compatibility. During maintenance, it is necessary to check and replace them according to the specified cycle in the equipment manual to avoid equipment failure due to filter failure.

Characteristics and Requirements of Air Compressor Hose Pressure Resistance: It must be able to withstand the rated pressure output by the air compressor (usually ranging from 0.7 to 1.6 MPa, and may be higher in special scenarios), with a certain safety margin to prevent burst due to excessive pressure. Aging and Weather Resistance: It needs to resist the effects of air, humidity, temperature changes, and ultraviolet rays, avoiding cracking, hardening or softening, and extending service life. Flexibility: It should have good bending performance, facilitating flexible arrangement in the working environment and reducing operational restrictions. Anti-wear and Anti-shock: In industrial environments, it may come into contact with the ground, equipment, etc., and needs to have certain wear resistance and anti-shock capabilities to prevent accidental damage. Smoothness of Inner Wall: The smooth inner wall can reduce the resistance of compressed air flow, lower pressure loss, and ensure supply efficiency.