China 1604530702 Atlas Copco Manufacturer, Supplier, Factory

Regularly replacing the Atlas Copco original oil separator kit is crucial for maintaining the efficient and stable operation of the GA90-110(W) series air compressors. It can reduce the failure rate, extend the equipment lifespan, and ensure the quality of compressed air.

Atlas Copco Air compressor Roller Bearing Main Types and Application Scenarios Spherical roller bearings Applicable to: Rotating components such as motor rotors and fan shafts that mainly bear radial loads. Features: Simple structure, low friction coefficient, capable of simultaneously bearing certain radial and axial loads, and allowing higher rotational speeds. Cylindrical roller bearings Applicable to: Parts that bear large radial loads, such as crankshafts. Features: Strong radial load-bearing capacity, large contact area between the rolling elements and the raceways, suitable for high-load conditions, but not suitable for bearing axial loads. Angular contact ball bearings

The Atlas Copco UD + series of filters come in multiple specific models (such as UD9+, UD15+, etc.), each corresponding to different processing flow rates and applicable equipment. If you need to know the parameters, compatible models or purchasing information for a specific model, it is recommended to obtain detailed information through the official channels of Atlas Copco or authorized dealers.

Faults and Maintenance Suggestions Common Problems and Solutions: Poor or blocked drainage: This is often caused by accumulated impurities. You can disassemble the valve body to clean the filter screen. In severe cases, the original valve needs to be replaced. Valve always closed or always open: This may be due to a fault in the electromagnetic valve coil or damage to the controller. You need to check the circuit and replace the corresponding components. Leakage: Caused by aging seals. It is recommended to directly replace the entire drainage valve (the original kit includes all seals). During maintenance, it is necessary to regularly (every 3 months) check if the wiring is loose, clean the drainage outlet, ensure that the winter environmental temperature is not lower than 0℃, and prevent freezing and cracking.

2901107700 KIT VALVE CHECK usually consists of components such as valve body, valve core, spring, and sealing ring. For the model 2901107700 KIT VALVE CHECK, its kit includes components like a metal valve core, spring, and a green sealing ring.

Regularly replacing the Atlas Copco filter and separator kits is an important measure for maintaining the good performance of the air compressor, reducing energy consumption and lowering the risk of failures.