China atlas copco 102372310 - PD75+ Manufacturer, Supplier, Factory

Installation and Maintenance: Select the corresponding specification of shock absorbers based on the model and weight of the equipment to ensure uniform force application during installation. After long-term use, check if the rubber has aged, cracked or deformed. If the performance deteriorates, replace the original factory parts in time to maintain the shock absorption effect.

1089058022 During the maintenance of the air compressor, Atlas Copco disassembles and cleans the unloaders, removes internal oil deposits and impurities, and checks the wear condition of the valve cores. Replace the worn-out sealing rings, gaskets, etc., to ensure the sealing performance. The multimeter is used to measure the resistance of the coil to determine if it is functioning properly, thus preventing control failure due to electrical faults.

Purchase Recommendation The 55℃ temperature control valve is a specific parameter component. It is recommended to purchase it through our authorized dealers, providing the specific model of the air compressor (such as G55, GA55, etc.) and the original valve part number to ensure the acquisition of matching original factory parts. Non-original factory valves may have temperature setting deviations or compatibility issues, affecting the temperature control accuracy and equipment safety. Although this valve is not common, it is crucial for ensuring the stable operation of the air compressor under specific conditions. Attention should be paid to maintenance and the accuracy of the parts.

Attention points for replacing the drive components and connecting parts of Atlas Copco GA15VSD screw air compressor When replacing parts such as belts and couplings, original factory parts (such as belt model and coupler specification must match the equipment) should be used. Non-original factory parts may cause transmission abnormalities due to size deviations. During installation, the coaxiality between the motor and the main unit must be ensured (belt transmission allows a small deviation, while coupler transmission requires strict calibration). Otherwise, it will lead to premature wear of bearings and increased vibration. After replacement, a trial run is required to monitor vibration, noise and temperature, and confirm that the drive system is operating normally.

Application scenarios and maintenance for Atlas Copco KIT THERM MPV C40 Applicable models for Atlas Copco KIT THERM MPV C40: Mostly used in medium-sized oil-lubricated screw compressors of Atlas Copco (such as some models of the GA series), especially suitable for working conditions with high requirements for pressure stability and oil-gas separation efficiency (such as precision manufacturing, food and pharmaceutical industries). Maintenance points: Atlas Copco KIT THERM MPV C40: Regularly check for any leakage in the valves (judged by the rate of pressure drop); Clean the valve cores and sealing surfaces to avoid jamming caused by oil stains and impurities; If the temperature sensing element fails, it needs to be replaced in time to maintain the constant temperature control function.

Maintenance Points: The coupling of Atlas Copco air compressors usually requires regular checks on the wear condition of its elastic elements, the tightness of the connecting bolts, etc. Some models of air compressors also have coupling cooling fans to help lower the operating temperature of the coupling and extend its service life. During maintenance, the working condition of the cooling fans also needs to be checked.